Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 46
  1. #1
    Poppa Dawg's Avatar
    Join Date
    Dec 2005
    Location
    Alice. Texas
    Posts
    1,015
    +1
    49

    Let's Suppose......

    O.K. I'm bored to death. Let's suppose you mate a Stage 3 RXT-X ( Rude 2 )( Riva ECU ) with a Rotax 16 vein racing pump & a SpeedFreek's bent set-back 12.5/22 Solas 4 blade & Riva Pump Extension & a stock 87 mm nozzle & a Jawz rideplate & a few dozen other goodies. Let's suppose your AFR guage is not working properly so you only hit it for a couple hundred yards in glass water before you shut it down cause you've been there done that! Now, not that I've done any of the above, but if the air was 72*, humidity 60% & water temp 72*, what kind of speed & Rpm's & boost do you think one would see in such a short distance? Will the boat hook-up like a mutha in the turns or will it suck? He who guesses best in this hypatetical combination get's an atta boy & a set of TAD Racing stickers to put on your forehead because you are obviously as bored as I am since Winter is here. Happy Holidays! ( Jerry can't participate because, well just because ).

    Doug


  2. #2
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by Poppa Dawg View Post
    ( Jerry can't participate because, well just because ).

    Doug
    DAMMIT! I was just about to answer too. Okay, i will sit back and watch this and have some fun

  3. #3
    Poppa Dawg's Avatar
    Join Date
    Dec 2005
    Location
    Alice. Texas
    Posts
    1,015
    +1
    49
    Damn, that was quick. Have you no life? Take your wife out to eat or something!

    Doug

  4. #4
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Jawz is selling ride plates now

  5. #5
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by Poppa Dawg View Post
    Damn, that was quick. Have you no life? Take your wife out to eat or something!

    Doug
    haha, i just happened to sit down at the computer after cooking my family a nice dinner. Oyster and shrimp poboys

    I'm going back to visit with them so you guys have fun!

  6. #6
    Poppa Dawg's Avatar
    Join Date
    Dec 2005
    Location
    Alice. Texas
    Posts
    1,015
    +1
    49
    Quote Originally Posted by bigdaddyRXP View Post
    Jawz is selling ride plates now
    Not really, it was one he had modified for some of his stuff & I just bought it off him a while back just to give it a go.

    Doug

  7. #7
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Its definitely gonna hook up like a mofo. 8600 rpms ,15lbs boost. I assume its set-up tight and is gonna corner awesome so 77.5 mph. This is if the A/F is close.
    Happy holidays big Dawg!

  8. #8
    Poppa Dawg's Avatar
    Join Date
    Dec 2005
    Location
    Alice. Texas
    Posts
    1,015
    +1
    49
    Quote Originally Posted by speedskixp View Post
    Its definitely gonna hook up like a mofo. 8600 rpms ,15lbs boost. I assume its set-up tight and is gonna corner awesome so 77.5 mph.
    Happy holidays big Dawg!
    The bar has been set by speedskip. I know he's thinking, how bad (or good) will that big nozzle affect his speed in that distance.LOL!

  9. #9
    Banned User
    Join Date
    Aug 2007
    Location
    Reading PA
    Posts
    1,670
    I am gonna agree its gonna hook like a mofo, and turn tight as hell, but gonna say top end is gonna be more like the 75-76 with that big nozzle. RPM wise i think that ur gonna be on the limiter at 8600, and 15-16 psi.

  10. #10
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Quote Originally Posted by Poppa Dawg View Post
    The bar has been set by speedskip. I know he's thinking, how bad (or good) will that big nozzle affect his speed in that distance.LOL!
    Yes, and that 16vein pump, and jaws plate angle.

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Lets post our kills.. Especially the yami ones..
    By Therock in forum 4-Tec Performance
    Replies: 44
    Last Post: 12-16-2008, 01:45 AM
  2. All the RXP Performance members let me know!
    By Angelse68cal in forum 4-Tec Performance
    Replies: 13
    Last Post: 08-20-2005, 12:45 PM
  3. Replies: 2
    Last Post: 07-15-2005, 05:04 AM
  4. Let everyone know!!
    By sprchrgd89gt in forum Sea Doo Open Discussion
    Replies: 16
    Last Post: 07-07-2005, 06:43 PM
  5. Lets discuss ride plate extensions..........
    By SKR8PN in forum 4-Tec Performance
    Replies: 26
    Last Post: 07-01-2005, 11:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •