Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20
  1. #1
    enforcer's Avatar
    Join Date
    Mar 2006
    Location
    San Antonio, Tx.
    Posts
    686
    +1
    22

    Which Intercooler

    Just wanted to ask how many out there can comment on these 2 intercoolers.......I'm wanting to hear some feedback on the Type 3 intercooler and the type 9 intercooler as used on the (Fizzle) kit.
    I wanted to see if anyone is still using the stock exhaust and if they were able to fit the Fizzle intercooler. A while back I purchaesd the Riva Gen 1 Vortech bracket and intercooler pipes with blow off valve and I'll forgo the BOV. Does anyone know if the type 9 produces less power than the type 12 or do they produce about the same?
    Last edited by enforcer; 12-10-2009 at 09:40 AM.


  2. #2
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,628
    +1
    809
    The smaller intercooler does not provide the same top speed gain. The XS kit in the online store can work with the stock exhaust, but the black resonator box must be removed. I have run this setup myself and know others who have as well, so I know it fits.

  3. #3
    enforcer's Avatar
    Join Date
    Mar 2006
    Location
    San Antonio, Tx.
    Posts
    686
    +1
    22
    Quote Originally Posted by JFizzleJR View Post
    The smaller intercooler does not provide the same top speed gain. The XS kit in the online store can work with the stock exhaust, but the black resonator box must be removed. I have run this setup myself and know others who have as well, so I know it fits.
    Fizz can you explain further on how to run stock exhaust as I have mock fitted the type 12 and the intercooler is very large. I allready have the stock resonator removed so and I know that perhaps I need to turn the stock tip up to maybe 80-85 degrees. The pipping I have is pretty close but I need to see about the stock exhaust pipe fitting around the rear of the intercooler and bracket. If U would P.M. your # perhaps I can give U call?

  4. #4
    GOT BOOST? Dockside's Avatar
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    3,879
    +1
    116
    i use 2.75" OD L-bend pipe and a 90deg pipe with hosese and clamp


  5. #5
    The Silver Bullet HemiRamOn22s's Avatar
    Join Date
    Aug 2009
    Location
    Dewey Beach, DE
    Posts
    155
    i cant wait to get mine installed! There is going to be so much more room for activities. its showed up today james. thanks again.

  6. #6
    Whats that whistling noise? jtskier11's Avatar
    Join Date
    Sep 2007
    Location
    Right side of Kansas
    Posts
    4,342
    +1
    87
    I used the baby XS. Zero complaints and still clicked off 77 on the gps.

  7. #7
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,628
    +1
    809
    Quote Originally Posted by enforcer View Post
    Fizz can you explain further on how to run stock exhaust as I have mock fitted the type 12 and the intercooler is very large. I allready have the stock resonator removed so and I know that perhaps I need to turn the stock tip up to maybe 80-85 degrees. The pipping I have is pretty close but I need to see about the stock exhaust pipe fitting around the rear of the intercooler and bracket. If U would P.M. your # perhaps I can give U call?
    This should help.
    Attached Images Attached Images  

  8. #8
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,628
    +1
    809
    And with a freeflow...

    No modification necessary to the exhaust tip on either setup.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	myxsic.JPG 
Views:	190 
Size:	443.2 KB 
ID:	162925  

  9. #9
    enforcer's Avatar
    Join Date
    Mar 2006
    Location
    San Antonio, Tx.
    Posts
    686
    +1
    22
    Quote Originally Posted by JFizzleJR View Post
    This should help.
    Fizz the bracket that I have is from the Riva gen. 1 with pipes that I purchased from Inkaddict. It has the cheesy plastic BOV that i'm going to cap off so i'm not using it.The pic that you showed me is that I noticed the intercooer is angled more agressively.Just asking to see if the bracket and pipes I had would actually fit the type 12 or am I better off using the type 9 because of the outlet size and it being closer. If not than maybe I can just purchase the pipes from your kit?

  10. #10
    BlackHawk's Avatar
    Join Date
    Mar 2006
    Location
    AL
    Posts
    963
    +1
    2
    Whats this type 12 and 9?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Advice needed on which intercooler for 2016 FZS SVHO
    By FPV TRANNY in forum Yamaha PWC Performance (4-stroke)
    Replies: 32
    Last Post: 09-14-2016, 04:45 AM
  2. which intercooler?
    By fallsjetski in forum Yamaha PWC Performance (4-stroke)
    Replies: 10
    Last Post: 09-16-2014, 07:12 PM
  3. Which intercooler for CC racing???
    By grantuk in forum 4-Tec Performance
    Replies: 14
    Last Post: 01-08-2008, 12:23 AM
  4. Which Intercooler Is Better
    By hydrojunkie in forum 4-Tec Performance
    Replies: 131
    Last Post: 07-18-2007, 08:47 AM
  5. Which Intercooler?
    By JFizzleJR in forum 4-Tec Performance
    Replies: 14
    Last Post: 08-15-2006, 07:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •