Results 1 to 6 of 6
  1. #1

    250 X ultra problem, help needed

    Hey Guys
    Have just taken ownership of a 2007 ultra 250x with 50 hours on it, i took it for a ride today and the engine cut out several times, was able to re-start and keep using it. the ski hasnt been used in a few months would this be due to it sitting for an extended period of time? or something with the engine?


  2. #2
    GODOSIDIS's Avatar
    Join Date
    May 2007
    Location
    Greece
    Posts
    735
    First quick check battery and spark plugs.Spark plugs are a common problem.

  3. #3
    Edify's Avatar
    Join Date
    Apr 2007
    Location
    Riverside, CA & Lake Havasu, AZ
    Posts
    107
    Something to consider if the simple fixes don't help. My 07 did the same thing, would be running fine, no sign of miss or hesitation, could be any amount of throttle, from idle to pegged, and it would just die. It would start right back up, but eventually die again. Over time, the amount of time between the cutouts became less and less. My problem was a bad harness. $800 dealer fix under ext warranty.

    Hopefully your fix is more simple. Good luck.
    Last edited by Edify; 12-15-2009 at 02:51 PM. Reason: spelling

  4. #4
    Bad fuse by ECU or the red small lead wire is loose. Most likely the fuse is the issue.

    Yellow 20amp one under the orange plug cover

  5. #5
    born riding's Avatar
    Join Date
    Mar 2007
    Location
    richmond, va
    Posts
    294
    +1
    3

    right

    Quote Originally Posted by Skips313 View Post
    Bad fuse by ECU or the red small lead wire is loose. Most likely the fuse is the issue.

    Yellow 20amp one under the orange plug cover
    skip is right, and this also happend on my ski. many of the 07 had a cluster f*** is the harnes. but i have inspected and all is good. just tripple check fuse holder

  6. #6
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    7,991
    +1
    455

    Re: 250 X ultra problem, help needed

    Good to know.


    Sent from my iPhone using Tapatalk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. ran into first problem help needed
    By XO1 SC in forum Kawasaki PWC Performance (4-stroke)
    Replies: 56
    Last Post: 06-29-2012, 11:51 PM
  2. cooling problems help needed please..
    By sx550 in forum Kawasaki Open Discussion
    Replies: 1
    Last Post: 04-04-2012, 06:27 PM
  3. 1988 JS 440 Problems, Help needed!
    By snox333 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-09-2011, 08:47 AM
  4. GP 1200 electrical problem - HELP NEEDED!!
    By ant11980 in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 09-17-2008, 09:01 AM
  5. starting problem, help needed!!!
    By auris1 in forum Polaris How To & FAQs
    Replies: 5
    Last Post: 08-27-2007, 02:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •