12-17-2009, 03:30 PM #1
Gauging Interest WC Ported 1300!!
I may part out my 1300 for another project....
Still not to sure IF im going to do it but before I pull it apart Id like to see if there's any interest...
60 hour 07 1300 motor... 25 hours on porting done by Woody.
new rings at 35 hours when apart for porting
Lowell cut high comp head
3* timing key
Riva efi controller
stator cover/fly wheel
gauges/Full electronics, all harness's, throttle bodies, Fuel pump, gas tank,
Full exhaust w Jet works mod and D plate, 1200 water box, factory bildge pump as well as whatever hardware or hoses are needed to install the motor.
The ski as been 79.5 @ 7180 rpm's with a 1200 grate and tabs on the ski. The ski is still intact for compression tests or to test ride it.. There are lots of members here that can vouch for this ski. I will also include extra oem gaskets, an extra oem piston, and what ever oem 1300 stuff I have laying around..
Pm me for any questions...
12-17-2009, 04:45 PM #2
I will vouch for this motor. It is the real deal. Runs super strong and consistant. This would be a total drop in and go fast setup in just about any hull...
I still can't belive your even thinking of doing this bro'.....
12-17-2009, 05:21 PM #3
All I really saw was the back of the ski most of the summer. The only time I saw it in front of me was when it was being loaded onto the trailer at the ramp.
12-17-2009, 05:31 PM #4
- Join Date
- Oct 2005
Fenn should jump on this...
12-17-2009, 06:41 PM #5
Hahaha... Thanks guys...
Fenn's scared of it....
12-17-2009, 07:04 PM #6
- Join Date
- Oct 2005
12-17-2009, 09:26 PM #7
I got to ride this ski a bunch of times this summer. it pulls like only a 2 stroke can. nice and snappy and it sounds mean! whoever gets it is getting a good motor.
12-17-2009, 11:35 PM #8
This will be a good turn key combo for someone..
12-18-2009, 12:49 AM #9
Thank all of you.. I dont really want to part it out but 2 ski's and a new baby isn't realistic rite now. If I get someone intrested in the motor Im going to shrink wrap the hull and save it for a rainy day. Maybe Ill put the whole ski up for sale in the spring. I dont really know yet.
Woody's porting was the most noticable power gain on my gpr and its killing me to think about selling this thing but somethings gotta give...
12-18-2009, 01:04 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mtrager in forum Yamaha PWC Performance (2-stroke)Replies: 55Last Post: 12-31-2007, 01:29 PM
By billy's gpr in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 09-19-2007, 07:30 AM
By sbarnette in forum Yamaha Open DiscussionReplies: 1Last Post: 09-13-2007, 12:22 PM
By Lvnspeed in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 10-04-2006, 10:37 PM