Results 1 to 9 of 9
  1. #1
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77

    What else to do??

    SC is out to Jerry for Riva and Mcmasters, exhaust is out to be replaced with new TDR 3in thru hull Setup. Opas are out, IC and stock plumbing has been replaced with aluminum and XS.

    Basically the back of my SKI is wide open. Any other cheap mods I should be thinking about while I have all this room to work??

    I need OPAS BO's and a good IC bracket but not sure what Im going to do at this point.

    Oh and Im assuming I need to do the XS bleed mod since I have the bleed line that was attached to my stock X IC?

    Thanks!


  2. #2
    Banned User
    Join Date
    Aug 2009
    Location
    Discovery Bay, CA
    Posts
    3,048
    +1
    336
    bilge pump is cheap and easy when thats all out if you dont have one. did mine when i had the back torn apart

  3. #3
    no reverse jayohentran's Avatar
    Join Date
    Mar 2008
    Location
    virginia
    Posts
    543
    +1
    1
    since it's open, you could change the thermostat.

  4. #4
    GOT BOOST? Dockside's Avatar
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    3,879
    +1
    116
    4in Intake, catch can, intercooler strainer, heat exchanger, riva T-stat, riva plate....

  5. #5
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    I have had the intake, catch can and strainer. Not interested in the ride plate or thermo at this point.

  6. #6
    GOT BOOST? Dockside's Avatar
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    3,879
    +1
    116
    ahhh commmon couple mph for less then $500

  7. #7

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    +1 on the bilge ....

  8. #8
    Chicago RXP'er Jaronk56's Avatar
    Join Date
    Aug 2008
    Location
    Chicago
    Posts
    465
    bilge, bilge, bilgeeeeee

  9. #9
    KC Blue Thunder's Avatar
    Join Date
    Oct 2007
    Location
    Jacksonville, Florida
    Posts
    2,079
    On the drain plugs replace the tie straps with small worm clamps. and ensure that those bilge lines are elevated and secured.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. please help guys dont know what else to do
    By starter99 in forum 4-Tec Performance
    Replies: 12
    Last Post: 04-18-2011, 09:48 PM
  2. GP1200R what else to Do???
    By ARODD56ACE in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 04-15-2010, 10:15 PM
  3. What not to do with your RXP
    By Green Hulk in forum Sea Doo How To & FAQs
    Replies: 60
    Last Post: 01-14-2010, 10:20 PM
  4. What NOT to do to a Croc
    By HopatcongGPR in forum Open Discussion
    Replies: 8
    Last Post: 01-06-2007, 09:34 AM
  5. What order to do GP800R Mods?
    By Minx20 in forum Yamaha PWC Performance (2-stroke)
    Replies: 14
    Last Post: 12-20-2006, 09:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •