Thread: Polished parts
12-30-2009, 01:53 PM #1
What do you guys use to keep polished parts nice and clean after the initial polishing? I've heard that Zoop Seal is pretty good stuff to keep polished metals spot free and shining. My Hot Seat pipes are pretty well polished but one day out on the water leaves them all water spotted up and dull.
12-30-2009, 02:28 PM #2
My answer to everything: Powdercoat it!
They do make clear powdercoat, I've never used it though.....
My Jetmate e-box is in the dishwasher, Eastwood Black Starlight (a metalflake powder) is in the gun, I'm trying to get up the courage to try it! (courage meaning I'm drinking)
12-30-2009, 02:43 PM #3
Seeing this had made me want some shiny bits in my hull, maybe ill polish the water muff
I like shiny bits this is my BM's engine bay
Its all highly polished metal i used NXT metal polish that repolishes and protect the finish, i dont know where it would work as well for the jet ski bits
12-30-2009, 05:12 PM #4
- Join Date
- Oct 2006
- Cleveland OH
12-30-2009, 05:41 PM #5
I am a big fan of not using anything on polished parts as far as coatings go. Wipe buff and wax.. "Wax on Wax off"
12-30-2009, 07:08 PM #6
Eastwood Starlight Black....
Buy me some clear and I'll give your parts a try!
03-03-2010, 11:10 AM #7
I guess I will bump this up again. Beerdart says to use just regular wax. I will have to try this out!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Mr Waverunner in forum Yamaha Open DiscussionReplies: 2Last Post: 11-02-2007, 10:43 PM
By potenza in forum Sea Doo Sport BoatsReplies: 0Last Post: 08-15-2007, 08:07 AM
By Heath GP1200 in forum Yamaha Old School SkisReplies: 0Last Post: 06-24-2007, 10:30 PM
By Drink My Dust in forum Yamaha How To & FAQsReplies: 35Last Post: 09-12-2006, 09:49 PM
By Shibby1485 in forum 4-Tec PerformanceReplies: 8Last Post: 10-24-2005, 10:46 PM