Thread: GPR Measurment Favor
12-31-2009, 11:23 AM #1
GPR Measurment Favor
Can someone measure the mounting hole distances (plate that mounts it to the hull), on a stock GPR's steering assy.?
And also the distance above the mounting plate to handle bar clamps, and the distance below the mounting plate to where the steering cable attaches?
01-01-2010, 09:52 PM #2
Someone has got to have one laying around, or their ski close by to take a few
01-01-2010, 10:00 PM #3
Mounting holes width 4 1/8" Height 5 1/8" Center to Center
01-01-2010, 10:02 PM #4
01-02-2010, 10:13 AM #5
- Join Date
- Oct 2005
still need the depth of the steering shaft arm?
01-02-2010, 10:25 AM #6
1200s and later 1300s have different patterns.
01-02-2010, 10:35 AM #7
The measurements I gave are from a 1200
01-02-2010, 10:59 AM #8
I'm good folks, thanks for the replies.
GP1200r is what I was looking for.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Mr Waverunner in forum Open DiscussionReplies: 6Last Post: 10-08-2007, 01:49 PM
By john07ex in forum Kawasaki PWC Performance (4-stroke)Replies: 2Last Post: 09-01-2007, 09:37 PM
By sconti stellari in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 08-07-2007, 07:40 PM
By carbuff91 in forum Yamaha PWC Performance (2-stroke)Replies: 10Last Post: 05-31-2006, 05:32 AM
By Pettee in forum Sea Doo Open DiscussionReplies: 5Last Post: 11-29-2005, 11:19 AM