Results 1 to 9 of 9
  1. #1

    Need help please

    Ok so yesterday I took the ski out and the following occurred ,i started up ran it for bout 10 min and then turned it off. I went to dock it and about 20 min later I went to go start it Again it didn't start. Nothing happened , I put a battery charger and then put the key in and all it said was sensor. It doesn't wanna start and when the charger is off the battery nothing happens. Anyone have any idea ? I don't think the batt is the problem but I'm lost !!!Thanks in advanced


  2. #2
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Starter relay??

  3. #3
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    To get the "sensor" display removed, it will have to be put on buds at a dealer. As for the no start have the battery load tested. Could also be a charging issue . Check your 2 (30a) fuses mounted on the side of the mpem.

  4. #4
    I have a 2005 Rxp and it got flipped and filled with water and the water set inside for a couple weeks cause my little cousins never told anyone they flipped it. An then I tolld it and got the engine flushed and got new oil and filter put in. And now when you put the key on it make a long loud beep and now of the gauges wont come on and the start button doesnt work. But you can ground out the silinoid and it will turn over perfectly but it isnt firing cause of the gauges not working so in want start. The dealership told me it was the ECU so I bought a new one and I still have the same problem anyone have any ideas what it could be. Thanks Michael

  5. #5
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    Quote Originally Posted by RXP2 View Post
    I have a 2005 Rxp and it got flipped and filled with water and the water set inside for a couple weeks cause my little cousins never told anyone they flipped it. An then I tolld it and got the engine flushed and got new oil and filter put in. And now when you put the key on it make a long loud beep and now of the gauges wont come on and the start button doesnt work. But you can ground out the silinoid and it will turn over perfectly but it isnt firing cause of the gauges not working so in want start. The dealership told me it was the ECU so I bought a new one and I still have the same problem anyone have any ideas what it could be. Thanks Michael

    was this salt, water or fresh? Could also be the MPEMor a bad ground.

  6. #6
    fresh water. If it happened to be a bad ground would it still turn over when you ground out silonoid. And what is the MPEM.

  7. #7
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    Quote Originally Posted by RXP2 View Post
    fresh water. If it happened to be a bad ground would it still turn over when you ground out silonoid. And what is the MPEM.
    possibly.Here the MPEM is part #1>9

    http://parsfinder.onlinemicrofiche.c...=13&A=129&B=29

  8. #8
    Quote Originally Posted by Snoman View Post
    Starter relay??
    Know where i can get a starter relay at ???????

  9. #9
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    your local dealer, Here in the online store, PPG, or Riva can get it for u.

    Part Number 278001802 STARTER RELAY $40.99

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. new to polaris need help please
    By pepp101 in forum Polaris Projects
    Replies: 22
    Last Post: 07-30-2007, 02:15 PM
  2. 96 SL900 Uh Oh Need HELP Please
    By christian79 in forum Polaris Open Discussion
    Replies: 12
    Last Post: 07-16-2007, 11:58 PM
  3. Need Help Please!!!!!! On Prop Choice
    By MB VIP in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 07-10-2007, 08:41 AM
  4. Need HELP Please!
    By GeoRXT in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-30-2006, 08:04 AM
  5. HEy Guys Need Help PLEASE!!!
    By SpeedStang95 in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-06-2006, 01:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •