Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 42
  1. #1

    '00 GPR parts garage sale

    PLEASE BE SERIOUS ABOUT A POSSIBLE PURCHASE BEFORE CONTACTING ME. PRICES ARE POSTED AND IF YOU DO NOT LIKE THEM THEN MAKE AN OFFER. I AM PRETTY EASY TO DEAL WITH AND WILLING TO WORK WITH YOU.

    ACCEPTING OFFERS

    ADDED MORE PICS. THERE ARE SOME ON PAGE 2 ALSO.

    All parts are stock off a 2000 GPR unless otherwise noted.

    1 Cylinder—Needs a Re-Nick---SOLD
    1 QTS Handle---SOLD
    1 set of QTS cables (the two cables that go from the handle to the pulley system)---SOLD
    1 head and gasket---$100
    1 Solas Concord 14/20—needs a blade repaired---$20
    1 oil pump assembly---$75
    1 buzzer---$10
    1 steering nozzle---$10
    1 choke lever---$10
    1 choke cable---$15
    2 air inlet ducts---$10
    1 exhausts manifold and gasket---$80
    1 stock exhaust—most of it is there minus maybe some bolts and the Mag mount
    1 R-Pot carbon fiber rideplate---SOLD
    1 set (3) of Riva flame arrester adapters for stock carbs---SOLD
    1 set of carbs---accelerator pumps and choke plates removed. Adjustment screws installed and jetted (cant remember what is in them now) for triple pipes. These were rebuilt pretty recent before I replaced them with 48s but not sure how many hours are on the rebuild.---SOLD
    2 coupler kits for SBN 44-48---one is open but only missing the allen wrench. Never Used.---$20 for the set
    1 oil reservoir---$20
    1 fuel pickup---$50
    1 PV motor---the cables are good but I think the motor is shot----$20
    1 set (2) stock sponsons---$30
    1 set (2) aftermarket metal (possibly aluminum) sponsons---I never used them and there is no backing plate.---$75
    1 plastic handle bar cover---SOLD
    1 intake grate---$75
    1 complete air silencer assembly---$80
    1 steering arm---$60
    1 stock handle bars---$10
    1 set of stock metal trim tabs----$50
    1 2000 Pump Assembly. Has a chunk taken from one vane (see in pics). Makes a good core if ya want. I ran it like this for a while and still won races.
    1 Solas YF-CD 13/19 Impeller---In decent shape.----$100

    I can get more pics on request. Most prices are not set in stone so make an offer. I need money for my new project.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCF1771.JPG 
Views:	67 
Size:	735.6 KB 
ID:	166251   Click image for larger version. 

Name:	IMG_3205.JPG 
Views:	70 
Size:	1.88 MB 
ID:	166292   Click image for larger version. 

Name:	IMG_3206.JPG 
Views:	69 
Size:	2.04 MB 
ID:	166293   Click image for larger version. 

Name:	IMG_3207.JPG 
Views:	48 
Size:	1.86 MB 
ID:	166294   Click image for larger version. 

Name:	IMG_3210.JPG 
Views:	61 
Size:	1.85 MB 
ID:	166295   Click image for larger version. 

Name:	DSCF1876.jpg 
Views:	48 
Size:	77.5 KB 
ID:	190534  

    Click image for larger version. 

Name:	DSCF1877.jpg 
Views:	52 
Size:	83.1 KB 
ID:	190535   Click image for larger version. 

Name:	DSCF1878.jpg 
Views:	49 
Size:	77.7 KB 
ID:	190536  
    Last edited by GPRsmartarse; 06-27-2010 at 10:53 AM.


  2. #2
    improvised tmg97gp's Avatar
    Join Date
    Jul 2008
    Location
    Midlothian Virginia USA ~ On the James River~
    Posts
    1,377
    +1
    10
    Pm..
    Last edited by tmg97gp; 01-22-2010 at 04:15 AM.

  3. #3
    Moderator Insanediego Joe's Avatar
    Join Date
    Mar 2006
    Location
    San Diego, California, United States
    Posts
    5,885
    +1
    142
    Quote Originally Posted by GPRsmartarse View Post
    All parts are stock off a 2000 GPR unless otherwise noted.

    1 Cylinder—Needs a Re-Nick
    1 QTS Handle
    1 set of QTS cables
    1 head and gasket
    1 Solas Concord 14/20—needs a blade repaired
    1 oil pump assembly
    1 buzzer
    1 steering nozzle
    1 choke lever
    2 air inlet ducts
    1 exhausts manifold and gasket
    1 stock exhaust—most of it is there minus maybe some bolts and the Mag mount
    1 R-Pot carbon fiber rideplate—I was told it was for a GPR but I think it is for a GP
    1 set (3) of Riva flame arrester adapters for stock carbs
    1 set of carbs---accelerator pumps and choke plates removed. Adjustment screws installed and jetted (cant remember what is in them now) for triple pipes. These were rebuilt pretty recent before I replaced them with 48s but not sure how many hours are on the rebuild.
    2 couple kits for SBN 44-48---one is open but only missing the allen wrench. Never Used.
    1 oil reservoir
    1 fuel pickup
    1 PV motor---the cables are good but I think the motor is shot
    1 set (2) stock sponsons
    1 set (2) aftermarket metal (possibly aluminum) sponsons---I never used them and there is no backing plate.
    1 plastic handle bar cover
    1 intake grate
    1 airbox
    1 steering arm and handle bar mounts
    1 stock handle bars

    I can get more pics on request. I will be traveling for the next week and a half so any parts can not be shipped until then. I will do some research and put up prices but for now make an offer. I need money for my new project.
    Need pricing on

    stock handle bars
    steering arm and bar mounts
    plastic handle bar cover
    steering nozzle
    qts handle and cables.

  4. #4
    philip_gpr's Avatar
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    2,724
    +1
    3
    That's a GPR CF rideplate

  5. #5
    Quote Originally Posted by philip_gpr View Post
    That's a GPR CF rideplate
    hmm..I thought I tried it a while back and it did not fit right. But I could be wrong. It has happened once or twice.

    Working on prices for all who asked.


    Thanks Philip

  6. #6
    Chris03HD's Avatar
    Join Date
    Sep 2009
    Location
    Jersey Shore
    Posts
    582
    +1
    3
    Prices Pictures on:

    Metal sponsons & Riva filter adapters for stock carbs.

    Thanks

  7. #7
    onefastgpr619's Avatar
    Join Date
    Sep 2009
    Location
    San Diego, Ca
    Posts
    198
    sent you a pm

  8. #8
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    pm sent

  9. #9
    I added some prices. Not sure if they are high or low or what. If I am high then make me an offer. I am low than I guess you got a good deal. Just took a stab at as everyone was asking me for a price. I am not sure on how much to sell the exhaust for. Need to look more.

    Thank you all for you inquires.

  10. #10
    Quote Originally Posted by Insanediego Joe View Post
    Need pricing on

    stock handle bars
    steering arm and bar mounts
    plastic handle bar cover
    steering nozzle
    qts handle and cables.

    Put prices up there for ya.

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Cleaning out the cabinet: Some GPR parts For Sale:
    By Pale Rider in forum Yamaha Classifieds
    Replies: 38
    Last Post: 07-05-2011, 11:54 AM
  2. FS !!!--**gpr parts for sale good price**--!!!
    By Rt-HemiBoY in forum Yamaha Classifieds
    Replies: 24
    Last Post: 04-15-2011, 10:35 PM
  3. Replies: 20
    Last Post: 08-20-2010, 04:07 PM
  4. FS XL and GPR parts for sale or trade
    By jeepsrdreaming in forum Yamaha Classifieds
    Replies: 1
    Last Post: 12-08-2009, 04:54 PM
  5. FS gpr parts for sale
    By KEYZBUM in forum Yamaha Classifieds
    Replies: 12
    Last Post: 10-14-2009, 07:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •