08-06-2005, 02:39 AM #1
how do u tightin up the throttle cable
we have some play in our throttle just wanted to get it tight agian how is it done
08-06-2005, 07:03 AM #2
The adjuster is the nut and coller at the throttle body.
You say you have some "play" in the cable. There should be some play in it, its designed that way.
At idle, the cable should have no tension on it, and the throttle plate should be against the throttle stop on the TB. Hold the throttle lever at WOT and see if the throttle plate is all the way to its WOT stop. If so, I would leave it alone.
If you have too little free play in the cable, then it won't always come to rest on the throttle stop and that could mess up the computers parameters and lead to performance loss.
08-06-2005, 07:29 AM #3
08-06-2005, 07:57 PM #4
hey thanks for the help we took it to our buddy that races bikes and he helped with it yea when it was a wot it really wasnt just a little though got it taken care of
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By newskiier in forum Sea Doo Open DiscussionReplies: 8Last Post: 09-14-2010, 08:51 PM
By koryk in forum Polaris Open DiscussionReplies: 2Last Post: 05-23-2010, 09:29 PM
By camar0 in forum 4-Tec PerformanceReplies: 1Last Post: 09-22-2008, 11:20 PM
By GeoRXT in forum 4-Tec PerformanceReplies: 4Last Post: 05-12-2007, 11:44 AM
By johnD in forum 4-Tec PerformanceReplies: 11Last Post: 04-21-2007, 11:39 AM