Results 1 to 7 of 7
  1. #1
    captain slow Turbo Retro's Avatar
    Join Date
    Jun 2007
    Location
    Australia - perth
    Posts
    1,679
    +1
    164

    c kit with stock ecu?? what injectors are people running?

    Hi all,

    this may have discussed before...

    running a RRFPR, walbro 342 fuel pump..., running 42# with the rude 1.. had no issues with it...

    about to put c kit in... any call on the injectors?? 48's??? 50's???

    thanks


  2. #2
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    Quote Originally Posted by retro_racer View Post
    Hi all,

    this may have discussed before...

    running a RRFPR, walbro 342 fuel pump..., running 42# with the rude 1.. had no issues with it...

    about to put c kit in... any call on the injectors?? 48's??? 50's???

    thanks
    It does depend what else you have and your ridingconditions alot.

    I would say you will be able to fuel it with 48s and the RRFPR but I think your idle will be well rich. You may want to consider a fuel controler or a BEGi fmu to control the fuel better. R88

  3. #3
    captain slow Turbo Retro's Avatar
    Join Date
    Jun 2007
    Location
    Australia - perth
    Posts
    1,679
    +1
    164
    forgot to add more detail..

    custom made rear air, 07 RXT, piranha external IC, hks BOV...riding conditions are ocean, its never smooth.. rarely!

  4. #4
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    Quote Originally Posted by retro_racer View Post
    forgot to add more detail..

    custom made rear air, 07 RXT, piranha external IC, hks BOV...riding conditions are ocean, its never smooth.. rarely!
    OK wel if you want to run that much boost, you need to have some sort of AF testing kit like the LC1, they are good bit of kit and its alot cheaper than blowing your motor. People can give advice on what the correct setup would be but there are so many veriables that can have big effcts on how much fuel you need.

    The other issue with that setup is that not too many people are going to be running it so getting any advice from some1 who has the setup you want is going to be difficult.

    Seeing that you are in AUS I would give Les Cooke a call and see what he has to say. R88

  5. #5
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471

    injector ???s


  6. #6
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673

  7. #7
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    didnt mean to ...thought i was back on the main. i moved it ..get better info

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What prop are people running with the ET low boost wheel?
    By JoeyDFZS in forum Yamaha PWC Performance (4-stroke)
    Replies: 8
    Last Post: 02-17-2013, 12:57 PM
  2. Leo's Pump Wedge puts my FX SHO with stock ECU/Injectors/hull over 80!
    By yamahamiamiski in forum Yamaha PWC Performance (4-stroke)
    Replies: 34
    Last Post: 12-04-2012, 04:06 PM
  3. S3 - What Adj Ring Size and any Prop Tweaks with Stock ECU?
    By snowrunner in forum 4-Tec Performance
    Replies: 6
    Last Post: 09-20-2008, 09:16 AM
  4. Cheapest way to run rude/b-kit with stock ecu
    By JFizzleJR in forum 4-Tec Performance
    Replies: 27
    Last Post: 12-06-2007, 04:31 PM
  5. riva kit with stock rubber cone
    By macattack in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-01-2005, 08:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •