Results 1 to 7 of 7
  1. #1

    951 Disassemble help

    Couldnt find anything when i searched but i am needing a how to on tearing the engine apart and info would help. I got all the bolts out but i pry and still wont budge help me


  2. #2
    KrunchovXPL-GTX-RX's Avatar
    Join Date
    Mar 2009
    Location
    Aiken, SC
    Posts
    1,391
    +1
    1
    What won't come off, the head, cylinder?

  3. #3
    I cant split the case apart where the crank is.

  4. #4
    Work Harder, Millions on Wellfare Depend On Us! ultramaxracing05's Avatar
    Join Date
    Aug 2009
    Location
    Beaumont, Texas
    Posts
    2,999
    +1
    123
    take off all of the bolts on the underside of the engine, dont pry anything off! use a rubber mallet.

  5. #5
    KrunchovXPL-GTX-RX's Avatar
    Join Date
    Mar 2009
    Location
    Aiken, SC
    Posts
    1,391
    +1
    1
    It is ok to pry on it provided that all the bolts are out and you pry in the right place.

    You should have 12 large and 12 small bolts in the cases.

    Confirm that all of them are out.

    There are two gaps in the seam (slots, if you will) to allow for breaking the seal. If I remember right, they are on the CB shaft side. A good sized flat blade or a pry bar will work. Normally I have been able to get them to split by simply twisting the blade inside the slot.

    If that will not work try two smaller blades and scissor the bars to push on both sides of the slot.

    Unless it sat in salt water for a while or someone sealed it with The Right Stuff you should be able to split them without a whole lot of effort.

  6. #6
    flyin' the friendly skies airbornexp's Avatar
    Join Date
    Aug 2007
    Location
    Mahomet, Il. USA
    Posts
    6,004
    +1
    163
    +1

  7. #7

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 951 engine help!
    By cvbdrew in forum 2-Stroke Performance
    Replies: 37
    Last Post: 07-26-2010, 02:42 PM
  2. 951 motor help
    By SUCKMYWAKE in forum 2-Stroke Performance
    Replies: 29
    Last Post: 04-28-2010, 10:40 PM
  3. 951 Crankshaft Help
    By 951ccshoe04 in forum 2-Stroke Performance
    Replies: 3
    Last Post: 01-14-2010, 09:34 PM
  4. 951 need help
    By brb99 in forum 2-Stroke Performance
    Replies: 25
    Last Post: 07-25-2008, 08:18 PM
  5. gsx-951 exhaust help
    By keith neff in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 08-24-2007, 03:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •