Results 1 to 4 of 4
  1. #1
    Project_X's Avatar
    Join Date
    Dec 2009
    Location
    Miami
    Posts
    162

    T-Bolt size for x Charger?

    Hey guys I got a little problem the sc exit tube hose keeps blowing off, I took it off and cleaned it as per the safety buletin posted by seadoo, I put a spectre 3" t-bolt clamp on it to hold it down, but it does nt seem to get enough bight it keeps blowing off.Any one know the specific size I got to use maybe something like 2" 75 or 2" etc. and were to order it. thanks guys. for any info. Long live the seadoo!!!! lol Vroom


  2. #2
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    SCer hoses are 2.5" I.D. I buy my t-bolt clamps from Silicone Intakes they are 100% SS. They size their clamps by I.D. The exhaust are 2.75". The only ones a little off are the big exhaust ones. I used 4.5", really need 4.25", but can't seem to find them. The 4" t-bolt clamp from Silicone Intakes will not work trust me. They are too small. They are 2.60EA and are holding up well for me.

  3. #3
    Project_X's Avatar
    Join Date
    Dec 2009
    Location
    Miami
    Posts
    162
    awesome thanks jp I am going to put my order in today.

  4. #4
    carlosdelgado's Avatar
    Join Date
    Dec 2008
    Location
    West palm beach,FL
    Posts
    1,438
    +1
    85

    Thumbs up the right clamps

    I was having the problem and this is what I did, I called my good friends at perry performance group(ppg) [email protected] their phone# 954-929-1636. Tell them your problem and they will be able to set you up with the right size t-bolt SS clamps. also before installing the clamps I cleaned the inside of the hose and the space on the supercharger were the hose will be attached. after both mating surfaces were cleaned, I put just a little bid of high temp silicone gasket maker all the way around., this will definitely take care of your problem... Good luck...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bolt size for pulling stator off crank.
    By Mike Greenwood in forum MSX/Matrix
    Replies: 3
    Last Post: 10-20-2015, 11:16 AM
  2. Need bolt size for 06 RXP lower engine cover...
    By pittperson in forum 4-Tec Performance
    Replies: 6
    Last Post: 02-10-2012, 08:40 PM
  3. Replies: 12
    Last Post: 05-12-2011, 09:35 PM
  4. Bolt size for hull trim/bumper strips
    By rspain75 in forum Kawasaki How To & FAQs
    Replies: 4
    Last Post: 07-26-2009, 04:08 PM
  5. Correct Bolt Sizes and Washers For Intake Grates
    By Mik72e in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 04-04-2008, 12:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •