Results 1 to 7 of 7
  1. #1
    markyyeah's Avatar
    Join Date
    Jan 2010
    Location
    wales uk
    Posts
    129

    2006 bgp1300r riva rideplate angle

    hi every one how do you angle your ride plate and what do you angle it with i heard washers but wont they push through the ski in time ive looked through post but cant get my head around it but no mentions what they use???? its a riva ride plate black???? any help would be great also ive been told im going to loose speed because i fitted a solas 14/20 ?? this is whats on it so far riva ride plate r&d intake pump seal kit riva efi solas d plate but my next mod is riva heads just waiting for them and a riva air filter and im going to remove the bits inside airbox ????????


  2. #2
    markyyeah's Avatar
    Join Date
    Jan 2010
    Location
    wales uk
    Posts
    129
    bump

  3. #3
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    Im running 1.13 which is bouncy at mid cruise speed but just right for me at full throttle.......do you know how to measure angle ? I also use 1 inch dia. aluminum washer's that I cut from 6061 bar stock, have never made a mark on hull....hope this helps.

  4. #4
    markyyeah's Avatar
    Join Date
    Jan 2010
    Location
    wales uk
    Posts
    129
    no not really but could learn quick i need to keep looking on how to do the angle and measurements thanks for your reply

  5. #5
    markyyeah's Avatar
    Join Date
    Jan 2010
    Location
    wales uk
    Posts
    129
    does any one think im going to loose speed with theses mods or am i going the wright way ?????

  6. #6
    markyyeah's Avatar
    Join Date
    Jan 2010
    Location
    wales uk
    Posts
    129
    i mostly ride at sea chop wave jumping etc but want speed???

  7. #7
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS: Riva GPR rideplate- angle cut
    By spdracr in forum Yamaha Classifieds
    Replies: 4
    Last Post: 05-30-2009, 02:28 PM
  2. KAW 250 Riva Rideplate Mod
    By ISLANDRACING in forum Kawasaki PWC Performance (4-stroke)
    Replies: 0
    Last Post: 10-04-2007, 03:20 PM
  3. 2006 VX110 Riva Add Ons ?
    By VX110FireGuy in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 03-09-2007, 06:34 AM
  4. R&D Rideplate Angle
    By slaw in forum Yamaha Old School Skis
    Replies: 2
    Last Post: 03-05-2007, 08:32 AM
  5. Original R&D 1200gpr rideplate angle???
    By jgustman in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 02-14-2007, 12:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •