Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Custom RXP Hull

  1. #1
    David 1 FAST VE's Avatar
    Join Date
    Jun 2005
    Location
    Southaven, MS
    Posts
    1,958
    +1
    1

    Custom RXP Hull

    I am wanting to see if anyone has any interest in an 05 Hull.
    I don't have pics right now but will get some when I can get out there and clean up around it. My garage is a wreak!

    What I have.
    05 RXP completly stipped and painted. I wanted a Kawaski green and it cam out close but not exact. It is sort of lime green. The paint is not perfect it has a few runs and one small chip about the size of a #2 pencil lead. The front of the inner hull was drilled and filled with foam to help with cracking (It has never craked and the bottom looks perfect).
    All the body fairing holes were filled so that you can run an RXX hood and all the associated side trim pieces.
    I have a complete RXX hood with Brand new never installed hood shell.
    It has RE Block Offs, Riva Sponsons, Rude Exhasut Tip installed

    I have all the electronics, fuel tank, handle bars, new rub rail inserts and bar pad that are royal blue that basicly match in color to an FZR blue, stock seat, and engine cowl with 4" air vents installed.

    I was thinking I would like to sell the complete hull for $2,500


    If I can move the hull I will sell the rest of my parts which is basicly an entire engine, ported head with ferra valves, an entire unassembled engine with all the needed parts for a complete rebuild just missing pistons


  2. #2
    Moderated GPRXPJared's Avatar
    Join Date
    Oct 2007
    Location
    Palm Harbor, Florida
    Posts
    1,226
    pics

  3. #3
    David 1 FAST VE's Avatar
    Join Date
    Jun 2005
    Location
    Southaven, MS
    Posts
    1,958
    +1
    1
    I will get some posted up tomorrow afternoon.

    David

  4. #4
    David 1 FAST VE's Avatar
    Join Date
    Jun 2005
    Location
    Southaven, MS
    Posts
    1,958
    +1
    1
    Ok here are the pics.
    I figure the complete hull, with RXX hood with new outer shell, RXX trim pieces, wiring harness, Riva sponson, and RE block offs, complete steering system, new blue rub rail inserts and blue handlebar pad for $2,500

    If there is any interest I can remove some parts or add parts as needed just let me know what you need.

    I will travel to deliver within reasonable distance of Memphis TN.

    As I stated the paint is not perfect but it is "OK" there are a couple of runs, one chip and some cracking in one of the foot wells.

    Ask any questions, I want this thing gone! This hull had less than 50 hours and was never wrecked or damaged. I got a "deal" on a paint job and when it was not perfect I lost interest and it has been sitting ever since.

    Hull will be sold with a Bill Of Sale and written reciept MS does not do titles

    David
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC02025.JPG 
Views:	123 
Size:	2.73 MB 
ID:	170706   Click image for larger version. 

Name:	DSC02026.JPG 
Views:	85 
Size:	2.62 MB 
ID:	170707   Click image for larger version. 

Name:	DSC02027.JPG 
Views:	99 
Size:	2.45 MB 
ID:	170708   Click image for larger version. 

Name:	DSC02028.JPG 
Views:	66 
Size:	2.11 MB 
ID:	170709   Click image for larger version. 

Name:	DSC02029.JPG 
Views:	74 
Size:	2.17 MB 
ID:	170710   Click image for larger version. 

Name:	DSC02030.JPG 
Views:	68 
Size:	2.68 MB 
ID:	170711  

    Click image for larger version. 

Name:	DSC02031.JPG 
Views:	74 
Size:	2.26 MB 
ID:	170712   Click image for larger version. 

Name:	DSC02032.JPG 
Views:	86 
Size:	2.63 MB 
ID:	170713  

  5. #5
    David 1 FAST VE's Avatar
    Join Date
    Jun 2005
    Location
    Southaven, MS
    Posts
    1,958
    +1
    1
    I will entertain reassonable offers!
    I could strip off the parts if someone only needed a good hull with a title, pull the grate and sponsons and lower the price??? Whatever let me know what you need because I may have it.

    I just want to move this out of my way!

  6. #6
    David 1 FAST VE's Avatar
    Join Date
    Jun 2005
    Location
    Southaven, MS
    Posts
    1,958
    +1
    1
    Make me an offer for the hull and whatever parts you may want with it!
    I want it gone!
    Last edited by 1 FAST VE; 02-16-2010 at 07:14 PM.

  7. #7
    David 1 FAST VE's Avatar
    Join Date
    Jun 2005
    Location
    Southaven, MS
    Posts
    1,958
    +1
    1
    Ok the hood is sold.

    Any offers??? The hull is legit and has a valid VIN number but is basicly stripped down.
    I can help with delivery and will drive around 300 miles for $1 a mile.

  8. #8
    how much for hull i live in starkville mississippi. I bought a ski from an insurance auction it had been slung off a trailer. The issused a Non repairable title for it. I got it home and got in back to water worthy conditions and thought I would be able to go get it inspected and be ready to go. But it was easier said than done.

  9. #9
    David 1 FAST VE's Avatar
    Join Date
    Jun 2005
    Location
    Southaven, MS
    Posts
    1,958
    +1
    1
    Hull was sold months ago sorry.
    If you live in MS you do not need a title. MS is not a title state.
    They have nothing to do with one even if you get it from a title state.
    You only need a Bill Of Sale; go and pay the taxes at the tax office and they will send you a registration card with a boat id number.

    They have no clue of any of the issues associated with the hull.

    I have bought and sold lots of skis in MS and some were junk "you build em skis" and never had an issue.

    Good Luck!

    David

  10. #10

    RXP

    Thanks alot Im gonna do that first thing in the morning. But if i could find a hull for cheap enough I would still like to get one cause i have to do alot of fiberglass work on mine

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Questions on 07 seadoo rxp hulls
    By seadooRXP2590 in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 12-27-2006, 01:31 AM
  2. RXP hull leaking
    By zoom zoom in forum 4-Tec Performance
    Replies: 12
    Last Post: 09-06-2006, 07:45 PM
  3. RXP Hull Same as 3 Seaters?
    By Haislip in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 07-08-2006, 07:21 PM
  4. Should I put a Keel Guard on my RXP? Hull protector.
    By BlackHawk in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 03-25-2006, 12:59 PM
  5. deep scratches in rxps hull on bottom WHAT to do?
    By macattack in forum 4-Tec Performance
    Replies: 4
    Last Post: 07-23-2005, 09:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •