Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 31
  1. #1
    t_hoang02's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    410

    Help!!! I building my own RRFPR...

    Ok I was reading threw Riva's instruction on how to remove the stock fuel pressure regulator. I am a bit confuse if i am reading it correctly it says to disconnect the green ground wire, then remove the stock fuel pressure regulator. then it goes on to said replace the stock regulator with a billet block-off supplied with Riva's kit...

    As the title said i am trying to build my own, and do not have this billet block-off... Can i just disconnect the green wire and leave the stock fuel pressure regulator in place?



    So the question is, what is everyone who built their own, doing in the case?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	1.jpg 
Views:	39 
Size:	29.4 KB 
ID:	171860   Click image for larger version. 

Name:	2.jpg 
Views:	37 
Size:	33.0 KB 
ID:	171861   Click image for larger version. 

Name:	3.jpg 
Views:	37 
Size:	49.1 KB 
ID:	171862  


  2. #2
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    ... Everyone is probably just wishing that they got off their check book, and bought the kit... just my guess

  3. #3
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    ya buy the time i got all the crap i had almost as much in it as the one you can buy ..the ony difference is i have nicer lines and fittings..and mine is on the rail..

  4. #4
    t_hoang02's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    410
    I though about that too.. but If I put one together, I can go with a better regulator, I was planning on using an Aeromotive regulator.

  5. #5
    Banned User
    Join Date
    Aug 2007
    Location
    Reading PA
    Posts
    1,670
    building ur own RRFPR is easy if u dont have a 2008 or newer ski, u can pick up a tank adapter from RAD4 or try and build ur own, I did mine for about 150 bucks with the deal I got on a tank adapter and the Aeromotive reg.

  6. #6
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by JonnyRXT View Post
    building ur own RRFPR is easy if u dont have a 2008 or newer ski, u can pick up a tank adapter from RAD4 or try and build ur own, I did mine for about 150 bucks with the deal I got on a tank adapter and the Aeromotive reg.
    Well... he has an 08

  7. #7
    t_hoang02's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    410
    dang-it... this little block off is keeping me away for my dreams of a RRFPR.... Their has to be a way.... anyone have an Idea???

  8. #8
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by t_hoang02 View Post
    dang-it... this little block off is keeping me away for my dreams of a RRFPR.... Their has to be a way.... anyone have an Idea???
    Call Riva and see if they will sell you just the block off part However... they are not real good about selling parts from one of their "kits"

  9. #9
    t_hoang02's Avatar
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    410
    Quote Originally Posted by bigdaddyRXP View Post
    Call Riva and see if they will sell you just the block off part However... they are not real good about selling parts from one of their kits

    what if i tell them i lost it and need too order a replacement....

  10. #10
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by t_hoang02 View Post
    what if i tell them i lost it and need too order a replacement....
    Best of luck with that too

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2006 speedster 430 Hp I am building my own trim
    By Jstcdoit in forum Sea Doo Sport Boats
    Replies: 120
    Last Post: 05-29-2016, 12:18 AM
  2. GP build. Help me spend my money =P
    By DUCKY UK in forum 4-Tec Performance
    Replies: 31
    Last Post: 09-11-2015, 06:03 AM
  3. What sizes needed to build my own Torx tool set?
    By SunSeaDoo in forum Sea Doo Spark
    Replies: 9
    Last Post: 05-24-2015, 09:03 AM
  4. Need help please with my Rrfpr
    By quiddo15 in forum 4-Tec Performance
    Replies: 15
    Last Post: 02-25-2013, 06:00 AM
  5. modding my own riva plate...13r 2005..help
    By Hydrotherapy in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 09-20-2006, 10:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •