Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1

    Where can I get a fuel line restrictor

    Does anyone know where I can get a fuel line restrictor or tips on how to make one. Thanks


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,589
    +1
    1,272
    Have you searched for restrictor?

  3. #3
    AWA Member 32DegH2O's Avatar
    Join Date
    Aug 2006
    Location
    Minneapolis, Mn.
    Posts
    2,008
    +1
    5

  4. #4
    btldigger's Avatar
    Join Date
    Feb 2007
    Location
    lebanon tn.
    Posts
    1,641
    Tap 1 end of a 1/4in barb fitting with a m5 x 0.8 tap then screw in the apropriate mikuni main jet for your setup. I prefer brass fittings but plastic would work too.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC02437.JPG 
Views:	151 
Size:	147.7 KB 
ID:	171912  

  5. #5
    bowsniper's Avatar
    Join Date
    Aug 2008
    Location
    macomb,michigan
    Posts
    5,896
    +1
    6
    Thats a neat alternative!. I wonder what size jet?

  6. #6
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,589
    +1
    1,272
    Quote Originally Posted by bowsniper View Post
    That's a neat alternative!. I wonder what size jet?
    How to make a replacement (1/4" hose barb and Mukuni main jet)

  7. #7
    Thanks, good advice. I think I'll make one but there's one more question. I did some checking and the low speed jets run from 67.5 to 110 and the high speed jets are 105 to 130. Will a low speed jet work.

  8. #8
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Jet numbers represent flow numbers and not the size of the hole. You can solder a jet shut and re-drill smaller.

  9. #9
    btldigger's Avatar
    Join Date
    Feb 2007
    Location
    lebanon tn.
    Posts
    1,641
    If you check the sbn tunning guide the jets come in 50- 150 for the low speeds and 50- 200 for mains. Both are in increments of 2.5. The tap size I gave is for the small mikuni main jets used in the sbn carbs.

    I use 2 mikuni pentagon pumps with a 90 main jet to give me 1.5 psi at idle and about 6 psi wot. Im feeding tripple novi 48s.

  10. #10
    Connecticut CrazyA's Avatar
    Join Date
    Nov 2005
    Location
    CT.
    Posts
    8,134
    +1
    1,050
    I believe the tap size for the main jets is M5 X .75

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Who makes and where can I get Waveater clips for an xl800?
    By JOJO567 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 11-22-2006, 12:09 AM
  2. where can I get a ...
    By skillet in forum 4-Tec Performance
    Replies: 3
    Last Post: 07-04-2006, 05:41 PM
  3. where can I get a quick disconect for flushing?
    By CarFanatic in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 06-19-2006, 11:32 AM
  4. Where can I get these parts?
    By croskel in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 06-12-2006, 11:22 AM
  5. Where can I get Hi Res Shoots of SeaDoo's??
    By 1 FAST VE in forum Sea Doo Open Discussion
    Replies: 7
    Last Post: 09-14-2005, 11:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •