Results 1 to 3 of 3
  1. #1
    JohnCiccarelli's Avatar
    Join Date
    Oct 2008
    Bay Tree Lakes, NC

    Crank or shortblock for 1998 1100ZXI

    Does anyone have a good crank or shortblock? I could also use a pro coupler.

    Last edited by JohnCiccarelli; 02-11-2010 at 06:55 PM. Reason: add to wanted list

  2. #2

    ZXI motor

    I have a perfect bottom end with like new crank cases and a BRAND NEW welded crank and seals already installed. Started rebuilding the motor last summer but never finished the project. It's all sealed up and litterally clean enough to eat off of. I also have brand new Wiseco pistons and rings that were going into this motor. (they are still in the box)
    I'll let the assembled cases and crank go for $500 shipped. (you can bolt your top end to it and go)
    3 Wiseco piston kits for $200 shipped. (retail on these are $110ea)
    Complete brand new gasket kit for $75 (retail on these are $130)

    Buy all 3 for $750 shipped

    Basically if you have your cylinders bored and honed to these pistons you would have a complete brand new engine for half of a stock rebuilt one from SBT.

  3. #3
    Cases are from my 1996 1100ZXI, originally had 2 pulse ports for carbs, I added a 3rd so each carb has its own. Also the cases have been gasket matched and slightly ported. The crank is brand new from SBT, I personally checked for straightness using v-blocks and a dial indicator. It has been trued and welded. Runout was only .001" (oem spec is under .04mm which is .00157") All the seals are brand new and Hondabond was used between the cases. The Wiseco pistons are 82mm and retail for $120.63ea. (originally thought they were 81mm which were $109.66ea.) I'll throw in the flywheel and front cover for $750 shipped to lower 48 firm. (shipping is not gonna be cheap, this thing is heavy!) I have the rest of the parts to make this a complete engine if your interested.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1100ZXi service manual in pdf format
    By Rider1958 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 1
    Last Post: 03-07-2008, 11:52 AM
  2. Intake grate 1998
    By PhilnEdee in forum Kawasaki PWC Performance (2-stroke)
    Replies: 2
    Last Post: 09-22-2007, 10:36 AM
  3. 1998 1100zxi
    By Stoffa17 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 2
    Last Post: 08-14-2007, 06:00 PM
  4. 1999 1100ZXi No spark!!
    By tyler_stephen in forum Kawasaki How To & FAQs
    Replies: 5
    Last Post: 06-06-2007, 09:22 PM
  5. removing an intake grate on a 1100zxi
    By joshxp in forum Kawasaki Open Discussion
    Replies: 0
    Last Post: 05-18-2007, 08:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts