Thread: Gelcoat repair instruction video
02-17-2010, 02:42 PM #1
Gelcoat repair instruction video
Came up on these instructional video's on gelcoat repair.
Might come up handy to save a few bucks and do it yourself.
02-17-2010, 05:00 PM #2
02-20-2010, 05:22 AM #3
02-20-2010, 06:39 AM #4
I found some spidercracks in my pumptunnel.
So i will need the instructions for sure.
Did the pumptunnel reinforcement a few months ago,so the inside is ok well inforced with many layers of glassfiber and the void filled with epoxy.
Maybe the spidercracks occured when i did the reinforcement,when i filled the void between the inner and outer hull,the epoxy got really hot ( don't know if the gelcoat can take that kind of heat) ,might be the cause of the cracks at the tunnel.
I have a few weeks left before the season starts so i will be ready in time.
02-21-2010, 09:31 AM #5
- Join Date
- Jun 2006
my tunnel spidercrackes showed up before I did the void and it looks the same after that, after I did the void than I used the same stuff to mix with black color agent to patch spidercrackes, went to test 1-2 foot chop with full throtle all day long, it's look fine to me. ( make sure wet sand and use dremmel grind the spidercracks line little deep enough to patch with opoxy.) hope this help.
Here are some pictures that I took on my friend 07 gtx broken ski before we dumped it away. I am not sure how thin on X boat.
02-21-2010, 09:40 AM #6
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By YoYamma in forum 4-Tec PerformanceReplies: 6Last Post: 01-18-2008, 10:07 PM
By holdnon72 in forum Sea Doo Open DiscussionReplies: 8Last Post: 07-16-2007, 09:53 PM
By NCNismo32 in forum 4-Tec PerformanceReplies: 3Last Post: 06-09-2007, 09:32 AM
By GTI06 in forum Sea Doo Open DiscussionReplies: 13Last Post: 05-07-2007, 06:17 AM
By RX951 in forum Yamaha How To & FAQsReplies: 0Last Post: 07-11-2006, 10:44 AM