Results 1 to 6 of 6
  1. #1

    Join Date
    Apr 2008
    Location
    Virginia Beach, VA
    Posts
    3

    Reinstalling SC on 06' RXT

    So I received my SC back from Jerry today after a full rebuild and I want to be sure that I put it all back together the right way. Ive been advised that I can just reverse sean's removal instructions which is what I plan to do.

    Are there any other things I should know as I get started with this? Do I need to grease/lube anything? Is that J-Pipe clam easy to get back on? Does the sc shaft just slide right on in without issue?

    Anything you guys who have done it before can tell me is greatly appreciated!!!


  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Apply some lube to the o-ring on the shaft housing. Slip the SC into the cover you will need to rotate the wheel from the intake to let the gears mesh dont force it then install the bolts and torque to spec.

  3. #3

    Join Date
    May 2008
    Location
    metairie,la
    Posts
    709
    Quote Originally Posted by beerdart View Post
    apply some lube to the o-ring on the shaft housing. Slip the sc into the cover you will need to rotate the wheel from the intake to let the gears mesh dont force it then install the bolts and torque to spec.
    +1 and dont forget the blue loctite on the 3 bolts.

  4. #4
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Quote Originally Posted by busa504 View Post
    +1 and dont forget the blue loctite on the 3 bolts.
    I only loctite the lower two the upper one is a PITA to remove. Some leave it out altogether.

  5. #5
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    I've never loctitied the Scer bolts on either of my skis..

  6. #6

    Join Date
    Jan 2010
    Location
    Houston
    Posts
    9
    I recently installed the metal washers on mine and had no problem getting everything back together. Jpipe clamp went on pretty easy and the rubber strap went on quickly with the help of a notched tool (I had one in my tool box already, but you can take a grinder and notch a flat screwdriver). An 8 mm gear wrench makes quick work of the top SC bolt.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Speed issues on 06 rxt 215
    By ski doo zx 800 in forum 4-Tec Performance
    Replies: 7
    Last Post: 06-24-2016, 09:33 PM
  2. Replies: 7
    Last Post: 11-13-2012, 09:55 AM
  3. HELP!!! I'm getting ready to install a STG2 SC on my RXT
    By t_hoang02 in forum 4-Tec Performance
    Replies: 5
    Last Post: 07-30-2008, 10:03 AM
  4. prop and sc questions on 06 RXP
    By mjet in forum 4-Tec Performance
    Replies: 1
    Last Post: 04-03-2007, 07:19 PM
  5. Replies: 12
    Last Post: 10-11-2006, 01:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •