Thread: Engine rebuild.
02-19-2010, 11:24 AM #1
- Join Date
- May 2007
- Mobile Al
I had a burnt piston on the front of the engine after teardown the bearing on the front of the crankshaft rattles and is a little stiff. Can the bearing be replaced or does the crankshaft need to be rebuilt? Any information would be helpfull.
02-20-2010, 09:00 AM #2
crankworks can rebuild your OEM crank for you and replace the bearing. If you decide a different route....SBT also sells cranks w/ exchange of yours.
02-20-2010, 11:10 AM #3
What ski is it ?
On a GP1200 the front bearing slips on.
Look at a parts drawing it will show you a drawing on the crank etc.
02-20-2010, 09:35 PM #4
- Join Date
- Jun 2008
- Bullhead City AZ.
Hi Check out ShortBlocksRus.com they do Great work and have FREE RETURN SHIPPING and a discount for Hulk Members when you call in here is a link to there crankshaft section.
Unlike a lot of rebuilders they replace all the rods and bearings in there rebuilt cranks I have called many crank and engine shops and they only replace what is BAD.
Someone said Crank Works there also a good rebuilder. but how ever you go with to rebuild ask them what parts they are going to replace If they only replace what is needed there doing a HALF A_s job.
I Use ShortblocksRus.com for all my crankshafts and shortblocks in my shop and have for about 15 years I buy about 200 crankshafts and engine from them a year.
Get after it Fast Summer is coming
02-20-2010, 10:02 PM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By christian79 in forum Polaris Open DiscussionReplies: 1Last Post: 08-19-2007, 10:13 PM
By christian79 in forum Polaris Open DiscussionReplies: 4Last Post: 08-07-2007, 09:34 PM
By MONKEY in forum 4-Tec PerformanceReplies: 2Last Post: 07-07-2006, 02:05 PM
By aha in forum 4-Tec PerformanceReplies: 5Last Post: 08-26-2005, 04:59 PM
By aha in forum 4-Tec PerformanceReplies: 7Last Post: 07-29-2005, 02:16 PM