Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 28
  1. #1

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205

    MY RXP-X and all extras for sale

    I'm selling the ski, tools, OEM parts, and anything else that has to do with this ski- wife says get a boat.

    I'll be working on adding to this post, but some starting info-

    2008 RXP with 64 hours.

    -B-kit supercharger upgrade from Engine Tech. Rebuilt with OEM rebuild kit and RIVA washers and McMaster washers. Installed, never started- 0 hours

    -8650 ECU from Les Cooke mapped for 60lb injectors and RRFPR

    Brand new never fired Bosch 60lb injectors-- installed

    -Les Cooke valve retainers installed, brand new never ran

    -Les Cooke Fogging system

    -JD1 pump pressure relief, installed never used--I bought an extra valve in case of failure so there is two complete valves

    -JD1 Open loop cooling w/ JD1 thermostat water routing. Routing is completed. Riva thermo, never ran, installed

    -Riva Pump Extension- Brand new, never used.

    -Solid front motor mount (pirana) never used, installed-- motor was aligned after installed. Package comes with alignment kit if you want to re-check it.

    -Riva Intercooler relo kit,

    -Riva shorty exhaust

    -Groco strainer

    -RE BLOCK OFFS

    -Catch can

    -Pump work by SKAT, machined lip for setback prop, balanced and blueprinted.

    2 solas props, one bent by Erik at speed freaks and the other is a brand new out of the box. They both have the SKAT setback mod done to them to match the SKAT pump. Both have R&D blue nose cones on them, never ran.

    1 excellent condition SKAT driveshaft seal. It also comes with a brand new rebuild kit from SKAT. Installed with t-bolts

    - 3 brand new DYNO TUNE gauges, BOOST, OIL, and A/F gauge. Round w/ blue LED-- INSTALLED in mirror pods, not wired up but the wire is ran into the hood compartment

    -4" intake w/ R&D 4" supercharger adapter and billet Engine Tech 4" adaptor...comes with both adaptors you can use the one you want.

    -Extra Billet nose cones

    -Custom Pump Cone with spacers - Brand new never used

    -Adjustable nozzle w/ 82-87 mm rings

    -Battery tender x2

    - 2 Ski Dollies

    -3 keys, one is a learner

    Exhaust is drilled/tapped for O2 sensor, which is installed, never fired up.



    -Renthal bars, ODI grips, Garmin GPS mounted on front hood for easy viewing,

    Brand new never seen water Jet trim seat cover, black and silver- Black grab handle with flow rites- you'll need a black plastic hood for the "black and silver look"

    One 1100 RULE bilge pump and One RULE 500 bilge pump installed,

    Splash Guard (ADW) installed-- brand new jettrim on the shelf, Ride plate holes filled...

    If your serious we'll talk on the phone and do a formal inventory of everything included as there are small things here and there...stuff like alignment tools, extra nozzles, McMaster washers, cases of oil, etc....

    I'm getting out of the ski game so any extras I have laying around that have to do with skis will go with the X boat.

    Comes with a pristine condition single SHORE LANDER black trailer.

    A lot of work done since last for sale and reduced price from 12 something to the 10,500.

    $10,500.00 Buyer pays freight. References available if needed.



    DO NOT ASK ME TO SELL SEPARATE PARTS-DO NOT ASK ME TO SELL SEPARATE PARTS-DO NOT ASK ME TO SELL SEPARATE PARTS-DO NOT ASK ME TO SELL SEPARATE PARTS
    Last edited by pdxrealtor; 06-21-2010 at 10:10 PM. Reason: UPDATED PARTS LIST AND LOWER PRICE


  2. #2

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    ......
    Last edited by pdxrealtor; 06-21-2010 at 10:11 PM.

  3. #3

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    Decals are stripped.

    Hull is in good condition, never beached. There is one small chip in the upper deck from bumping a dock, otherwise very clean.


    It's now a black and silver boat.... you'll need an orange hood replacement.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	CIMG3528.JPG 
Views:	200 
Size:	1.88 MB 
ID:	174310   Click image for larger version. 

Name:	IMG_0020.JPG 
Views:	229 
Size:	1.31 MB 
ID:	174311  
    Last edited by pdxrealtor; 06-21-2010 at 10:12 PM.

  4. #4

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    ......
    Last edited by pdxrealtor; 06-21-2010 at 10:17 PM.

  5. #5

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    More pics
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_2098.JPG 
Views:	104 
Size:	158.8 KB 
ID:	174323   Click image for larger version. 

Name:	IMG_2099.JPG 
Views:	82 
Size:	179.3 KB 
ID:	174324   Click image for larger version. 

Name:	IMG_2102.JPG 
Views:	111 
Size:	178.3 KB 
ID:	174325   Click image for larger version. 

Name:	IMG_2103.JPG 
Views:	98 
Size:	167.0 KB 
ID:	174326   Click image for larger version. 

Name:	IMG_2104.JPG 
Views:	77 
Size:	163.6 KB 
ID:	174327   Click image for larger version. 

Name:	IMG_2105.JPG 
Views:	92 
Size:	180.2 KB 
ID:	174328  

    Click image for larger version. 

Name:	IMG_2107.JPG 
Views:	101 
Size:	184.5 KB 
ID:	174329  

  6. #6

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    .....
    Last edited by pdxrealtor; 06-21-2010 at 10:18 PM.

  7. #7

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    Sorry- not willing to part out anything, or sell any parts.

    Title in hand free and clear.

  8. #8
    go fast jump high gtx-x2's Avatar
    Join Date
    Nov 2009
    Location
    palm bay fl
    Posts
    137
    That my friend is one clean looking ski wish I had the doe for it.

  9. #9
    Banned User
    Join Date
    Aug 2009
    Location
    Discovery Bay, CA
    Posts
    3,048
    +1
    336
    that sounds like a reaaaaally good deal for all thats included, here's a free bum!!!. i understand you dont wanna part it out but if you descide to i call first dibs on the motor mount and alignment tool!

  10. #10

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    Quote Originally Posted by Mike H View Post
    that sounds like a reaaaaally good deal for all thats included

    It is a really good deal

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts Stock and modified parts for sale off my RXP
    By jasonstang88 in forum Sea Doo Classifieds
    Replies: 37
    Last Post: 06-14-2012, 03:09 PM
  2. Replies: 10
    Last Post: 03-09-2012, 02:21 AM
  3. FS RXP and RXPX Stuff for sale
    By beachbum0286 in forum Sea Doo Classifieds
    Replies: 8
    Last Post: 12-21-2010, 07:47 PM
  4. FS RXP and GTX Parts for Sale
    By thompsdw in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 10-30-2009, 04:05 PM
  5. My crank is cracked......Anyone have a extra for sale?
    By lawracing in forum 4-Tec Performance
    Replies: 11
    Last Post: 07-21-2006, 05:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •