03-01-2010, 09:28 PM #1
Question on Solas impeller install 17/29 R-12x
I'm trying to figure out what the little blocker in the middle of the stock impeller is and how do I get it out if I need to transfer it to the solas impeller? What is it for? Do I install the impeller and then fill from the cone with gear oil?
Freaking stealership last year rebuilt my pump and guess what... my stock impeller was way loose. I thought I'd have to crank on it to get it to bust free, but nope... one little turn and it started to back right off. Geez. Glad I decided to swap impellers.
One last note, how many drops of red loctite do I put on the threads for the impeller?
First pic is the solas, you can see my finger nail in the back.
03-01-2010, 10:51 PM #2
its called a Stopper Plug, use a screwdriver to push it out from the back side once the prop is off.
03-01-2010, 10:59 PM #3
Nitro, you are seriously my hero!
Thank you so much!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jaba01 in forum 2-Stroke PerformanceReplies: 9Last Post: 03-02-2008, 05:00 PM
By GTXX in forum 4-Tec PerformanceReplies: 12Last Post: 05-12-2007, 09:39 PM
By Tiburon in forum 4-Tec PerformanceReplies: 4Last Post: 10-08-2006, 06:39 PM
By Jeff C in forum 4-Tec PerformanceReplies: 6Last Post: 08-03-2005, 11:41 PM
By rx4pain in forum 4-Tec PerformanceReplies: 6Last Post: 06-14-2005, 03:42 PM