Thread: pump bearing loose???
03-06-2010, 08:29 AM #1
pump bearing loose???
When I winterized my friend 07 gtx 155, noticed that with pump in the vice, if i grab the prop by the nose cone, I could feel a little loose (up/down and side/side). Is That the bearing that is loose??. If so, does all seals must be replaced as well or if they could be re-used??
03-06-2010, 08:49 AM #2
Just curious why you are just winterizing the ski now, especially in Canada. Did you pull the cone off to check for water? If there's water in there, you need to do both the bearings and seals... Ron
03-06-2010, 09:41 AM #3
Did winterising last fall but we didn't want to do the job back then, now in process of fixing things before season starts (1 month).
we foung only 2 drops of water in the cone, might be just condensation cause grease was fine, still yellow and no sign of color change.
Quick question... once impeller removed, I'll have to remove circlip and I guess when I will unpress the bearing, both seals and bearing should come out at same time, therefore chances are that the seals are gonna be fine and be re-usable?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Hydrotherapy in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 03-03-2007, 10:39 AM
By porksword in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 02-05-2007, 05:49 PM
By dhoad in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 02-23-2006, 05:12 PM
By Sunfunzoom in forum 4-Tec PerformanceReplies: 24Last Post: 02-13-2006, 06:28 PM
By RXPDAVID in forum 4-Tec PerformanceReplies: 3Last Post: 08-31-2005, 12:55 PM