Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    FZR AD's Avatar
    Join Date
    Mar 2010
    Location
    Abu Dhabi, United Arab Emirates, United Arab Emirates
    Posts
    187

    I got all the parts, What else I need?

    Hey everybody,

    These parts are getting installed on my 2010 FZR:


    1. Riva Rear Exhaust Kit
    2. RIVA Performance Power Filter
    3. R&D SHO Power Core Intake Manifold and Intercooler CFM Kit
    4. R&D Aquavein Intake Grate
    5. R&D Pro Series Ride Plate
    6. R&D Anti-Cavitation Cone
    7. R&D Grate/Shoe Seal Kit
    8. R&D 13/23 Pro Pitch Impeller
    9. HKS BOV Kit
    10. R&D YAMAHA C3-11 MONSTER WHEEL
    11. R&D High Performance Billet Supercharger Shaft
    12. R&D Yamaha SHO Intercooler Temperature Control system

    Do I need anything else? or do I have to replace anything?


  2. #2
    RichieFZR's Avatar
    Join Date
    Jan 2010
    Location
    Gold Coast, Queensland, Australia
    Posts
    2,093
    +1
    4
    Quote Originally Posted by FZR AD View Post
    Hey everybody,

    These parts are getting installed on my 2010 FZR:


    1. Riva Rear Exhaust Kit
    2. RIVA Performance Power Filter
    3. R&D SHO Power Core Intake Manifold and Intercooler CFM Kit
    4. R&D Aquavein Intake Grate
    5. R&D Pro Series Ride Plate
    6. R&D Anti-Cavitation Cone
    7. R&D Grate/Shoe Seal Kit
    8. R&D 13/23 Pro Pitch Impeller
    9. HKS BOV Kit
    10. R&D YAMAHA C3-11 MONSTER WHEEL
    11. R&D High Performance Billet Supercharger Shaft
    12. R&D Yamaha SHO Intercooler Temperature Control system

    Do I need anything else? or do I have to replace anything?
    R&D PowerShot
    R&D R2 Reflash

  3. #3
    Addicted Member 5001craig's Avatar
    Join Date
    Jul 2007
    Location
    Northeast Indiana
    Posts
    2,924
    +1
    11
    Quote Originally Posted by RichieFZR View Post
    R&D PowerShot
    R&D R2 Reflash
    Exactly what I was thinking with a Powershot and reflash (but possibly the R1?).

    I'd get a PET tach and also a LC-1 wideband air fuel gauge.

    But with the reflash and Powershot mods your pump will more than likely need some upgrades too.

    Oh, and welcome to the forum!

  4. #4
    gordon lasiter #328's Avatar
    Join Date
    Aug 2008
    Location
    katy, texas , United States
    Posts
    1,647
    +1
    28
    Quote Originally Posted by RichieFZR View Post
    R&D PowerShot
    R&D R2 Reflash
    ditch the oem intercooler. you should also get the intercooler / engine cooling kit from r&d.

  5. #5
    gordon lasiter #328's Avatar
    Join Date
    Aug 2008
    Location
    katy, texas , United States
    Posts
    1,647
    +1
    28
    Quote Originally Posted by FZR AD View Post
    Hey everybody,

    These parts are getting installed on my 2010 FZR:


    1. Riva Rear Exhaust Kit
    2. RIVA Performance Power Filter
    3. R&D SHO Power Core Intake Manifold and Intercooler CFM Kit
    4. R&D Aquavein Intake Grate
    5. R&D Pro Series Ride Plate
    6. R&D Anti-Cavitation Cone
    7. R&D Grate/Shoe Seal Kit
    8. R&D 13/23 Pro Pitch Impeller
    9. HKS BOV Kit
    10. R&D YAMAHA C3-11 MONSTER WHEEL
    11. R&D High Performance Billet Supercharger Shaft
    12. R&D Yamaha SHO Intercooler Temperature Control system

    Do I need anything else? or do I have to replace anything?
    if you stick with a oem ecu, you will need a 14/24 impeller or you will be on the rev limiter @ 3/4 throttle. if you go with the reprogramming a 13/23 actual pitch will be the ticket, but the pump will need to be modified. i heard some guys are having good results with a 160mm liner and a skat long blade.

  6. #6
    FZR AD's Avatar
    Join Date
    Mar 2010
    Location
    Abu Dhabi, United Arab Emirates, United Arab Emirates
    Posts
    187
    RichieFZR >>> Will search these now ...

    5001craig >>> Thanks for the warm welcome, what kind of upgrade i should do to the pump?

    gordon lasiter >>> Where can i get the 160mm? and what are the numbers you hit with all the mods you got?

  7. #7
    ABUDHABI boost your life's Avatar
    Join Date
    Dec 2009
    Location
    uae
    Posts
    95
    +1
    1

    Thumbs up how r u FZR AD

    up date us the results that u will get befor the reflash ..i mean the speed on GPS... r u from abudhabi ??

  8. #8
    FZR AD's Avatar
    Join Date
    Mar 2010
    Location
    Abu Dhabi, United Arab Emirates, United Arab Emirates
    Posts
    187
    Quote Originally Posted by boost your life View Post
    up date us the results that u will get befor the reflash ..i mean the speed on GPS... r u from abudhabi ??
    Sure i will try it first without the reflash and the powershot and see the results and then after installing them.

    and yes, i live in ABU DHABI

  9. #9
    ABUDHABI boost your life's Avatar
    Join Date
    Dec 2009
    Location
    uae
    Posts
    95
    +1
    1

    hi

    thanx .

  10. #10

    Join Date
    Mar 2007
    Location
    united arab emirates; abu dhabi
    Posts
    98
    +1
    1
    Quote Originally Posted by FZR AD View Post
    Hey everybody,

    These parts are getting installed on my 2010 FZR:


    1. Riva Rear Exhaust Kit
    2. RIVA Performance Power Filter
    3. R&D SHO Power Core Intake Manifold and Intercooler CFM Kit
    4. R&D Aquavein Intake Grate
    5. R&D Pro Series Ride Plate
    6. R&D Anti-Cavitation Cone
    7. R&D Grate/Shoe Seal Kit
    8. R&D 13/23 Pro Pitch Impeller
    9. HKS BOV Kit
    10. R&D YAMAHA C3-11 MONSTER WHEEL
    11. R&D High Performance Billet Supercharger Shaft
    12. R&D Yamaha SHO Intercooler Temperature Control system

    Do I need anything else? or do I have to replace anything?
    well ur mods seem interesting to me.. i am looking forward for ur results.. i have a vx ride plate and as it mentioned here at the forum it gives good numbers.. i jst bought the the vx ride plate but i am waiting for my ski to finish 10 hours so i can give it full throttle and compare my speed be4 and after instalation the ride plate. i'll inform you if any improvement in speed

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Got all my parts, The Build Begins :) (first build)
    By HallPass in forum Yamaha Projects & Build Threads
    Replies: 1299
    Last Post: 06-26-2010, 03:12 AM
  2. removing the engine... what do i need to know
    By spaceman in forum Yamaha PWC Performance (2-stroke)
    Replies: 15
    Last Post: 03-30-2009, 09:42 PM
  3. GPR 1200 parts - What do you need?
    By KawieGuy in forum Yamaha Classifieds
    Replies: 12
    Last Post: 09-15-2008, 10:40 PM
  4. What else is needed to run Riva ECU?
    By Gus13letter in forum 4-Tec Performance
    Replies: 7
    Last Post: 08-21-2008, 02:56 PM
  5. Got all my parts, The Build Begins :) (first build)
    By HallPass in forum Yamaha PWC Performance (2-stroke)
    Replies: 1295
    Last Post: 07-12-2008, 06:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •