Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27
  1. #1
    One day at a time..... N8R's Avatar
    Join Date
    Dec 2005
    Location
    TAMPA
    Posts
    3,716
    +1
    41

    Talking Parting out my 84mph gpr

    THE FOLLOWING PARTS ARE FROM MY 2004 GPR THAT REACHED A MAX TOP SPEED OF 84.2 AND COULD HAVE WENT FASTER BUT RAN OUT OF SEASON BEING UP NORTH.

    TIM JUDGE PORTED CYLINDERS WITH OEM 1300 PISTONS & GUITEENS(ACTUAL VALVES).
    #1-8HRS #2-60HRS #3-60HRS. $1,500+shippingsold

    RIVA GAS VALVES (NEW BELLOWS,SPRINGS) 8 HRS CAPS ARE A LITTLE CHEWED UP BUT,WORK FINE $270+shippingsold

    RIVA 3 PIECE GIRDLE HEAD CUT BY TJ #1-162PSI #2 160PSI #3 158 PSI .40SQUISH USING 2 LAYER HEAD GASKET. $250+shippingsold

    1300 CASES WITH OEM CRANK AND CONNECTING RODS 60HRS ON CRANK COMES WITH COUPLER, THIS WOULD A EASY ROUTE FOR SOMEONE WHO DOES NOT WANT TO MESS WITH SPLITING THE CASES $400.00 PLUS SHIPPING, OR CRANK,CONNECTING RODS& COUPLER FOR $325.00+ SHIPPING/ $200 FOR THE CASES + SHIPPINGsold

    VFIII REEDS WITH SPACER BAR 8 HRS COMES WITH 8 HRS GASKETS PLUS A BRAND NEW SET OF ISLAND RACING HEAVY DUTY GASKETS $350.00 + SHIPPING.sold

    ROSS NEMOS STG2 SONIC BOOMS WITH CUSTOM BILLET PASS THROUGH FUEL RAIL INJECTORS FLOWED 8 HRS AGO BY INJECTOR REHAB THESE WERE CLOSE TO 2 MPH ON TOP VS OPEN TBS AND HAVE KILLER HOLESHOT.8 HRS $440.00 + SHIPPING WITHOUT CUSTOM FUEL RAIL AND OR WITH IT $500.00. IF THE TBS SELL AND NOT THE RAIL I WILL SELL THE RAIL FOR $150.00 + SHIPPING. Throttle bodies sold fuel rail still available for $150.00 shipped in U.S

    RIVA EFI CONTROLLER 19HRS $200 + SHIPPINGsold

    2004 INTERMEDIATE SHAFT AND BEARING WITH COUPLER $150.00+SHIPPING. sold

    2006 HO PUMP WITH 30" SHAFT AND TAIL CONE,STRAINER, LEADING VEINS SHARPENED AND REAR SQUARED,BOTTOM GROUND FOR RIDEPLATE CLEARANCE ,BEARINGS HAVE 20 HRS $300.00+SHIPPING.sold

    1300 EXHAUST SYSTEM(MANIFOLD,U-PIPE,STINGER)COMES WITH FERCHO PACKAGE CUT RIVA DPLATE AND GUSS 13 DRYOUT PLATE,TAPPED FOR TEMP SENSOR WHICH COMES WITH IT AND HAS JB WELD AROUND IT FOR EXTRA SAFETY HAS JET WORKS MOD INCLUDED $135.00+SHIPPING. SOLD

    2004 GPR GAUGE READS 116HRS $85.00+ SHIPPING.SOLD

    2004 ECU $100.00+SHIPPING. sold

    2004 ELECTRICS INCLUDING STATOR AND COVER CDI BOX (no plug wires) $115.00+SHIPPING.

    2004 PV MOTOR AND CABLES $50.00+SHIPPING. sold

    1300 WATER BOX $40.00+SHIPPING.sold

    GPR FUEL PUMP$115.00+SHIPPING. SOLD

    2 STARTERS AND BENDEXS $40.00+SHIPPING FOR THE NEWER ONE $20.00+SHIPPING FOR THE OTHER(HAS A COUPLE SMALL RUST SPOTS BUT, WORKS GREAT).

    5 DEGREE KEYWAY $10.00 SHIPPED IN U.S.lost

    AR210 BOAT PROP SKI RAN 83.0-83.5 CONSISTANT WITH IT. $145.00+SHIPPING. sold

    VX 15/23 CUT OUT OF THE 22HUB BY IMPROS HAS LESS THAN 3 HRS USE SKI WENT 84.2 AND WOULD HAVE WENT MORE BUT IT GOT DARK LAST DAY OF THE SEASON.PAID OVER $500.00 PLUS TIME WITH IMPROS $225.00 PLUS SHIPPING.sold

    85MM NOZZLE BORED TO 88MM GREAT FOR TURNING BIG PROPS $55.00+SHIPPING.. sold
    DECIDED TO PROCEED WITH PART OUT. ALL PAYPAL ADD 3% FOR FEES. YES I SHIP OVERSEAS.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	GPR Parts 034.jpg 
Views:	102 
Size:	2.79 MB 
ID:	178533   Click image for larger version. 

Name:	GPR Parts 037.jpg 
Views:	76 
Size:	3.26 MB 
ID:	178534   Click image for larger version. 

Name:	GPR Parts 038.jpg 
Views:	94 
Size:	3.22 MB 
ID:	178535  
    Last edited by N8R; 05-03-2010 at 03:57 PM.


  2. #2

    Join Date
    Apr 2008
    Location
    Lindenhurst, IL
    Posts
    2,242
    i might take the HO pump

  3. #3
    Hybrid AWD's Avatar
    Join Date
    Apr 2008
    Location
    Newport News, Va
    Posts
    325
    I will get that waterbox from you and 2004 Intermediate Shaft and bearing with coupler.

  4. #4
    crashhard's Avatar
    Join Date
    Jul 2007
    Location
    Philly PA, Wildwood NJ, Indialantic FL
    Posts
    2,382
    +1
    24
    will take ecu when your ready

  5. #5
    mike1706's Avatar
    Join Date
    Dec 2008
    Location
    ,Florida
    Posts
    1,691
    +1
    16
    i want to buy the complete pump ho pump let me know

  6. #6
    One day at a time..... N8R's Avatar
    Join Date
    Dec 2005
    Location
    TAMPA
    Posts
    3,716
    +1
    41
    Decided to proceed with part out below is a list of dibbs so far please send a pm confirming.
    1. Svrd Ram- cases & crank,vfIIIs,06 pump
    2. Hybrid Awd- 1300 waterbox,2004 intermediate shaft,bearing,cupler.
    3. Yamaha Pat- 2nd for 06 pump
    4. Crashhard- ecu
    5. Mike 1706- 3rd for pump

  7. #7
    philip_gpr's Avatar
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    2,724
    +1
    3
    wow, you don't see parts of this high quality for sale on the forum that often

    this is the best of the best

  8. #8
    Hybrid AWD's Avatar
    Join Date
    Apr 2008
    Location
    Newport News, Va
    Posts
    325
    N8r, you can remove me from the pump list. I'm picking one up from Lee. Thanks... I'm still interested in the other parts though.

  9. #9
    One day at a time..... N8R's Avatar
    Join Date
    Dec 2005
    Location
    TAMPA
    Posts
    3,716
    +1
    41
    Quote Originally Posted by Hybrid AWD View Post
    N8r, you can remove me from the pump list. I'm picking one up from Lee. Thanks... I'm still interested in the other parts though.
    done

  10. #10
    One day at a time..... N8R's Avatar
    Join Date
    Dec 2005
    Location
    TAMPA
    Posts
    3,716
    +1
    41
    dissassembly begins tommorow, parts ship out monday. thanks

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts Finally parting out my GPR 2002
    By lazsrxp in forum Yamaha Classifieds
    Replies: 32
    Last Post: 11-13-2012, 12:50 PM
  2. FS Parting out my 2008 gpr **VIDEO**
    By GPR in forum Yamaha Classifieds
    Replies: 65
    Last Post: 03-21-2012, 10:08 AM
  3. Parting out Stock 2001 GPR
    By focal13 in forum Yamaha Classifieds
    Replies: 21
    Last Post: 09-17-2008, 11:13 PM
  4. Possibly parting out my 80+mph RXP
    By bankyf in forum Sea Doo Classifieds
    Replies: 6
    Last Post: 07-10-2008, 03:03 PM
  5. CONSIDERING selling or part out my Tripple Piped XL1200
    By need4pwr in forum Yamaha Classifieds
    Replies: 8
    Last Post: 06-20-2008, 03:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •