Results 1 to 5 of 5
  1. #1
    Yellow93's Avatar
    Join Date
    Apr 2006
    Location
    San Antonio, Texas, United States
    Posts
    2,429
    +1
    122

    Am I missing anything for this swap?

    Since people aren't too interested in buying modded 2 strokes right now I have decided to swap the motor from my 2004 XLT into my 2002 GRP and then sell the XLT as a low hour basically stock ski. Mainly I am worried about whether I have everything I need for the pump setup. What I want to do is swap the complete motor and pump setups from one ski into the other. My question is can I swap everything from my 2004 pump setup onto my 2002 GPR or will I need something else since its a 02 which had the different intermediate shaft?


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by Yellow93 View Post
    Since people aren't too interested in buying modded 2 strokes right now I have decided to swap the motor from my 2004 XLT into my 2002 GRP and then sell the XLT as a low hour basically stock ski. Mainly I am worried about whether I have everything I need for the pump setup. What I want to do is swap the complete motor and pump setups from one ski into the other. My question is can I swap everything from my 2004 pump setup onto my 2002 GPR or will I need something else since its a 02 which had the different intermediate shaft?
    the 04 XLT and the 02 GPR have the same drive shaft and the same intermediate shaft so you will be fine.

  3. #3
    Yellow93's Avatar
    Join Date
    Apr 2006
    Location
    San Antonio, Texas, United States
    Posts
    2,429
    +1
    122
    awesome! Thanks Jim

  4. #4
    zx11rider's Avatar
    Join Date
    Jun 2009
    Location
    Cape Coral
    Posts
    1,132
    That was a fast Xlt you had make sure you let us know what that setup does in a gpr I am thinking about putting mine in a gpr as well to play with i have a Tim Judge ported 1300 sitting in the garage it went 71.8 in the Xlt and the last gpr this topend was in went 82+

  5. #5
    Yellow93's Avatar
    Join Date
    Apr 2006
    Location
    San Antonio, Texas, United States
    Posts
    2,429
    +1
    122
    It should run pretty good in the GPR!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. I am going to miss you for the next couple of weekends but your in good hands
    By 97modman in forum Yamaha PWC Performance (4-stroke)
    Replies: 2
    Last Post: 06-18-2011, 08:22 PM
  2. Am I missing anything? Car repair question
    By NCHeel in forum Open Discussion
    Replies: 10
    Last Post: 03-08-2010, 10:06 PM
  3. Flipping my XLT for hull work. Am i missing a step ?
    By richdash in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 04-23-2009, 02:54 PM
  4. am i missing anything ?
    By banshee350racer in forum Yamaha PWC Performance (2-stroke)
    Replies: 35
    Last Post: 10-25-2008, 11:07 AM
  5. what's am i missing for my 08 HO?
    By Tarheel in forum Yamaha PWC Performance (4-stroke)
    Replies: 10
    Last Post: 07-16-2008, 09:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •