Thread: RXP X Question
03-26-2010, 10:46 AM #1
- Join Date
- Feb 2010
RXP X Question
2009 RXP X want to leave it as stock as possible. Just want to change the intake grate and prop. Whats the best combo (if there is one) for a stock machine. or should I just leave what I have.
03-26-2010, 10:51 AM #2
Re: RXP X Question
Worx grate, 15/22r prop and put in a 4 in kanaflex intake.
03-26-2010, 11:12 AM #3
What kind of water do you ride in? If ruff I would go with a Worx, if smooth I would go with a R&D. Which ever one you go with I would just leave the stock prop, fill the ride plate holes and enjoy.
03-26-2010, 11:21 AM #4
WORX is what you want. Just as much top end as an R&D but it has better acceleration, hookup, and handles better.
03-26-2010, 11:29 AM #5
03-26-2010, 12:45 PM #6
I wouldn't think you would need a new prop if you are just getting the grate, becauase if im correct (and correct me if im wrong every one) just the grate wont up your RPMs. Thus you aren't trying to get your RPMs in that 8100-8150 zone so all the prop will do is trade off top end for low end.
03-26-2010, 01:24 PM #7
+1 on the worx... good for all riding conditions
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ULTRA RACER in forum 4-Tec PerformanceReplies: 1Last Post: 10-28-2007, 07:49 PM
By psi_2_high in forum 4-Tec PerformanceReplies: 3Last Post: 09-24-2007, 07:34 AM
By miamirider in forum 4-Tec PerformanceReplies: 12Last Post: 04-16-2007, 05:09 PM
By fazznick in forum Sea Doo Open DiscussionReplies: 5Last Post: 03-19-2007, 04:07 PM
By sleeplessnMS in forum 4-Tec PerformanceReplies: 0Last Post: 04-13-2006, 09:08 PM