Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25

Thread: gprxp help

  1. #1
    pedruko's Avatar
    Join Date
    May 2008
    Location
    MIA
    Posts
    259

    gprxp help

    just finished a gprxp with a 07 motor and a 07 rxt harness, now my problem is that when i put the key nothing comes on no beep nothing completely dead, check all the fuses checked the ground all fine what could it be what else can i check? the privious owner had it running fine


  2. #2
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,628
    +1
    807
    this might be too simple to be your solution, but make sure the plug behind the gauges is snapped in place. it's hard to reach under the hood so maybe the pins aren't making contact?...

  3. #3
    pedruko's Avatar
    Join Date
    May 2008
    Location
    MIA
    Posts
    259
    i should hear the fuel pump as soon as i put the key in rite?

  4. #4
    no reverse jayohentran's Avatar
    Join Date
    Mar 2008
    Location
    virginia
    Posts
    543
    +1
    1
    yeah, the fuel pump should kick on when you attach the key

  5. #5
    no reverse jayohentran's Avatar
    Join Date
    Mar 2008
    Location
    virginia
    Posts
    543
    +1
    1
    and going off of jfizzle...check to see if the plugs are plugged in tight for the steering harness.

  6. #6
    pedruko's Avatar
    Join Date
    May 2008
    Location
    MIA
    Posts
    259
    the motor is not tighten down yet could that be affecting the ground?

  7. #7
    Banned User
    Join Date
    Aug 2009
    Location
    Discovery Bay, CA
    Posts
    3,048
    +1
    336
    if you have one of your grounds on the same bolt as a motor mount.... ABSOLUTELY!!

  8. #8
    Moderator Insanediego Joe's Avatar
    Join Date
    Mar 2006
    Location
    San Diego, California, United States
    Posts
    5,885
    +1
    142
    its a ground. make sure all the grounds are bolted up tight.

  9. #9
    pedruko's Avatar
    Join Date
    May 2008
    Location
    MIA
    Posts
    259
    Quote Originally Posted by Insanediego Joe View Post
    its a ground. make sure all the grounds are bolted up tight.
    they are. i have the three cables that go to the three screws on the block and the two that bolt on the neg wire to the battery and the one end of the battery neg is on one of the three screws too so guess they are rite

  10. #10

    Join Date
    Feb 2006
    Location
    Birmingham AL
    Posts
    2,924
    +1
    2
    Check the roll over switch

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. GPRXP Help Needed
    By Blue Notch in forum Conversion PWC Performance Skis
    Replies: 3
    Last Post: 08-05-2016, 08:32 AM
  2. gprxp help
    By pedruko in forum 4-Tec Performance
    Replies: 5
    Last Post: 03-26-2010, 03:29 PM
  3. gprxp rpms help!!!
    By pedruko in forum Conversion FAQ and Tips
    Replies: 37
    Last Post: 09-28-2009, 06:35 PM
  4. need help with my gprxp
    By cliff0413 in forum Conversion PWC Performance Skis
    Replies: 28
    Last Post: 08-18-2008, 05:04 PM
  5. GPRXP Handling Parts Selection - Help - Experienced GPRXP'rs Help me pick out parts!
    By boostaholic in forum Conversion PWC Performance Skis
    Replies: 9
    Last Post: 01-16-2008, 02:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •