Thread: Here I go again new RXT hop up
08-10-2005, 11:00 PM #1
- Join Date
- Jul 2005
Here I go again new RXT hop up
Well lasted two days with my RXP blown up so trying a RXT.
Ride plate cant be moved up like old ones so has to have a wedge. Going to test a little at a time to see what works. Interesting stuff with the pump nozzle it has straitening veins in it!
RR ECU wont work well untill I get the air figured out my RXP had ram air and the RR ECU didnt respond untill that was done.
A) RR IC
B) Worx sponsons
C) Rear exhaust
D) OPAS Blocks
D) Front air to charger ( Lots of cowling cutting on this RXT ) There is very little air in or out of this hull, that's why no one is getting numbers.
A) RR ECU
B) Impeller 14/19 or what ever it takes to get 8400
A) RR Cam
B) After cam test than Heads.
08-11-2005, 07:29 AM #2
Yep, there is some drilling involved to get that air in there. Use a couple of hole saws to whatever size you are looking for. Also, have an extra body around when removing the front, that thing is big and bulky. I went to Home Depot and cut a piece of plexi to match the access panel where the fire extinguisher was. Here are a couple of pics of what I did.
08-11-2005, 09:55 AM #3
Re: Here I go again new RXT hop upOriginally Posted by Burnwater
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Dr Len in forum Sea Doo Open DiscussionReplies: 12Last Post: 05-17-2006, 11:05 PM
By CIAJNIK in forum Sea Doo Open DiscussionReplies: 6Last Post: 04-24-2006, 09:05 PM
By Vman in forum Sea Doo Open DiscussionReplies: 19Last Post: 03-20-2006, 03:13 PM
By Green Hulk in forum Sea Doo Open DiscussionReplies: 11Last Post: 09-22-2005, 01:32 PM
By Phil in forum 4-Tec PerformanceReplies: 6Last Post: 07-25-2005, 06:27 PM