Thread: 1993 SL750 Carb Ajustment
03-30-2010, 11:15 AM #1
- Join Date
- Sep 2009
1993 SL750 Carb Ajustment
I'm in the process of bench adjusting my carbs. (SBN) but the high speed adjustment screw has a tab on it and is only adjustable to about 1/3 of a full turn. How should these carbs. be adjusted?
03-30-2010, 11:17 AM #2
The tamper cap comes off. Just pry it off with a small screwdriver.
03-30-2010, 10:18 PM #3
- Join Date
- Oct 2006
- Cleveland OH
Do that ^^^^
Or better yet, just clip the tiny 'tang" off the limiter cap.
That will give you something better to turn when making adjustments.
It's just that "tang" that stops the screew from turning. With that gone, you can adjust them as much as you need..
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By dumplins192 in forum Polaris ClassifiedsReplies: 19Last Post: 05-04-2008, 10:15 PM
By buck0123 in forum Polaris Open DiscussionReplies: 1Last Post: 10-09-2007, 08:44 PM
By Polaaron in forum Polaris How To & FAQsReplies: 4Last Post: 08-13-2007, 10:46 PM
By ugadawg131 in forum 2-Stroke PerformanceReplies: 2Last Post: 05-30-2007, 05:49 PM
By novanuttz in forum Polaris Open DiscussionReplies: 3Last Post: 04-29-2007, 02:36 PM