Thread: TB Question????
04-10-2010, 07:07 PM #1
When WOT should the plate hit the stop as in open ALL the way
04-10-2010, 07:10 PM #2
No. The best way to check is pull the hose off and make sure the butterfly is not going passed 90* at WOT.
04-10-2010, 07:13 PM #3
Tks beerdart... i put on the riva billet finger throttle lever and was just double checkin.
04-10-2010, 07:26 PM #4
Make sure you get WOT! Most aftermarket finger throttles do not have enough pull.
04-10-2010, 07:41 PM #5
just checked and it not opening all the way, what the best way to correct this issue. doesnt need to go much its close. It goes all the way back to close but no slack in cable.
04-10-2010, 08:19 PM #6
04-10-2010, 08:57 PM #7
04-10-2010, 09:09 PM #8
04-10-2010, 09:17 PM #9
04-10-2010, 09:20 PM #10
OK to get more throw.
1. Grind the back of the lever.
2. Grind the grip.
3. The best solution install a shim where the lever is attached to the mounting boss.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)