Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1

    Join Date
    Dec 2005
    Location
    SWEDEN/Fort Lauderdale
    Posts
    382

    Stinger pipe for gpr1300?? Is there any?

    I wonder if there are any "aftermarket" stingerpipe for the gpr1300??
    Or can I use a Stinger S3 pipe for my gpr1300?

    I have seen that there are many for the 1200


  2. #2
    Mr Bill's Avatar
    Join Date
    Aug 2005
    Location
    Macon Georgia
    Posts
    451
    I think they are interchangeable.

  3. #3
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    Quote Originally Posted by Mr Bill
    I think they are interchangeable.
    Yes they are. Stingers or ProTec Turbo tube.

  4. #4
    Crash Test Dummy Smitty's Avatar
    Join Date
    Jun 2006
    Location
    Cullman, AL
    Posts
    1,280
    +1
    2
    You can probably pick up a couple of S3 pipes pretty cheap; I know where there is at least 1 that the guy might sell.

    I really think it's the right thing to do for your Exciter project; everyone doesn't like them for the GPR's because they will cost you about 1mph on your top end; why spend the money to go slower? But looking at how stuffed it's going to be inside your boat, it will make life SO much easier.

  5. #5
    Why spend extra money? Your stock exhaust is fine with the D-plate Other people will say the same.

  6. #6
    Think He's looking at mounting 2 in His Exciter project and suffering for room. I was thinking of brackets on a shock system.

  7. #7
    ABBOTT's Avatar
    Join Date
    Jul 2005
    Location
    Birmingham, AL / Lay Lake
    Posts
    3,736
    +1
    96
    In your case, the aftermarket stingers may be the only way to go due to the clearance issues. Pro-Tec has one as well.

    Wish you the best on this project, it's one that i have been following.

  8. #8

    Join Date
    Dec 2005
    Location
    SWEDEN/Fort Lauderdale
    Posts
    382
    Thanks alot guys!

    I already have a aftermarket stinger pipe, will see which one it is..S1, S2,S3!?

    Anyone who knows if/where I can buy only the "cooling" thing before the pipe?. The thing in the picture with the hoses attaced and that says "RIVA S3" on.. If how much would one cost..

  9. #9
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    I know Robsauto2 has two Pro-Tec turbo tubes he want to get rid of then you would have a pair. I think he will let them go cheap.

    Hej
    OsideBill

  10. #10
    Me Hahn and Joe H204YOU's Avatar
    Join Date
    Jan 2006
    Location
    Panama City Beach Florida
    Posts
    1,535
    Quote Originally Posted by osidebill
    I know Robsauto2 has two Pro-Tec turbo tubes he want to get rid of then you would have a pair. I think he will let them go cheap.

    Hej
    OsideBill
    Yes and the Turbo Tube's are better than the rest,I have tried them all.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Is there any performance mods for the SLT 700????
    By kyle5647 in forum Polaris PWC Performance
    Replies: 5
    Last Post: 08-25-2013, 08:13 PM
  2. Is there any problems Towing a FX140 with a boat.
    By cuban133054 in forum Yamaha Open Discussion
    Replies: 8
    Last Post: 05-01-2008, 12:50 PM
  3. Replies: 6
    Last Post: 02-04-2008, 09:25 PM
  4. Is there any way too...?
    By lludacrisboy in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 12-03-2007, 11:40 PM
  5. Replies: 1
    Last Post: 08-28-2007, 03:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •