Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1

    After Researched...These are my thoughts / plans.. any suggestions?

    After lurking for quite sometime and making a few phone calls, this is what i gathered...

    I'm not a fan of the stage 1,2,3 kits because I think i can gain much more for the almighty dollar....

    R&D Grate
    4" kanaflex intake
    15/21R solas
    83mm nozzle
    48lb injectors
    ET137 w/ spacer
    pro series opas block offs


    prolly around $2,000 for all...

    would this get me the most bang for the buck??? and what's your opinion on my prop choice vs the 22r w/ that nozzle????


  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    What model ski?

  3. #3
    left out the most important info........ LOL

    2008 RXT-X most riding in the lake.... at sealevel.... year round in florida... temp shouldn't have much affect performance seasonal anyway...

  4. #4
    Quote Originally Posted by dontletitfoolya View Post
    After lurking for quite sometime and making a few phone calls, this is what i gathered...

    I'm not a fan of the stage 1,2,3 kits because I think i can gain much more for the almighty dollar....

    R&D Grate
    4" kanaflex intake
    15/21R solas
    83mm nozzle
    48lb injectors
    ET137 w/ spacer
    pro series opas block offs


    prolly around $2,000 for all...

    would this get me the most bang for the buck??? and what's your opinion on my prop choice vs the 22r w/ that nozzle????
    um...

    a 15/21?

    No external intercooler??

    I dont see an RRFPR up there...

    with no ECU 42s are enough for an ET137 with an RRFPR ..

    Might want to research some more.


    None of that should cost you $2000..

  5. #5
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Its an 08 X boat.

    Quote Originally Posted by Powerslave View Post
    um...

    a 15/21?

    No external intercooler??

    I dont see an RRFPR up there...

    with no ECU 42s are enough for an ET137 with an RRFPR ..

    Might want to research some more.


    None of that should cost you $2000..

  6. #6
    fh23rxp-x's Avatar
    Join Date
    May 2008
    Location
    Miami
    Posts
    462
    i dont think is going to cost you less that 2000 dollars ...

    and you can run the 137 with just the 48lbs injectos on a x , your gonna be just fine

  7. #7
    Yah... i thought my research was correct..... fh23... i'm on lake okeechobee...just north of you.... what have you done to your ski?.... and you think my list is a good start?... i was instructed to go with the 15/21 becuz of the tx.... with the extra weight... should be adequate.... not too mention imma 300lb'er... LOL

  8. #8
    fh23rxp-x's Avatar
    Join Date
    May 2008
    Location
    Miami
    Posts
    462
    Quote Originally Posted by dontletitfoolya View Post
    Yah... i thought my research was correct..... fh23... i'm on lake okeechobee...just north of you.... what have you done to your ski?.... and you think my list is a good start?... i was instructed to go with the 15/21 becuz of the tx.... with the extra weight... should be adequate.... not too mention imma 300lb'er... LOL

    yeah you should be fine i have the same set up as you except the 137 and i have a 15/22 ...

    a buddy of mine has a rxtx with the same set up as you and he runs 77 all day

  9. #9
    the same setup.... meaning 15/21????

  10. #10
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    rxtx has the intercooler..already wont hold him up as much as a sotck 215 cooler will ..it shoud be good for the mid 70s ..

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Polaris virage backfired and blew my resonator apart , any suggestions why?
    By quadracer22 in forum Polaris Open Discussion
    Replies: 42
    Last Post: 05-20-2015, 06:49 PM
  2. Replies: 0
    Last Post: 06-13-2014, 04:43 PM
  3. What are these on my RXP?
    By inteljd in forum Sea Doo Open Discussion
    Replies: 7
    Last Post: 04-29-2009, 06:33 PM
  4. for those that didnt know these are my headers
    By hydrojunkie in forum Videos & Pictures
    Replies: 9
    Last Post: 03-21-2008, 10:49 PM
  5. What are these on my Hull?
    By H2HO in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 06-07-2007, 08:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •