04-18-2010, 07:04 AM #1
X-Charger, 50lbs Injectors and fuel needs?
OK, so after much deliberation, I decided if I was going to go, might as well go big! So below is a list of the things I am getting ready to order. I only have one question. With the X-Charger and 50lbs injectors, will the stock FPR be enough to handle this, or would it be wise to go with a RRFPR? That is the last thing on my list if I get enough people that cause me concern about it. So please!!! If you have an answer, that is proven, not just a guesstimation , then please let me know! I'm ready to hit the send button for my order, just need this last Bit O Info! Thanks guys! Oh yeah, and if any one sees anything that just doesn't seem right, LET ME KNOW!!
RIVA RXP-X/RXT-X Intercooler Upgrade Kit
RIVA Pro Series Water Box for 08 and Newer Models (except iS)
Blow-off Valve Kit, HKS SSQV; SD 255,215 SC
Solas 15/22R for RXP-X / RXT-X
Riva Pump Wedge, 2-degree/155mm ID, SD, RXP/RXT/X/GTX
RIVA Metal Clutch Washers for 08 models
RIVA RXP/RXP-X/RXT-X VTS Extension Rod
RXP/RXP-X/RXT-X Pro-Series Reduction Nozzle
R&D Intake Grate for X model Skis
Exhaust Kit, Rear, SD 255/215 (fits RXP/RXT/GTX and X models)
Riva Pro Series OPAS Block Off's for RXP & RXP-X
RIVA Rear Air Intake for RXP
Riva X-Charger Pro-Series Impeller & Housing
RIVA Pro-Series SD Fuel Injector Kit (set of 3)
04-18-2010, 07:20 AM #2
looks like a good set up the only suggestion i have is go with bosh injectors over the riva..and you may only need 48 not sure on the x boats and the x upgrade
the through hull doesnt go with that ..waterbox
and if you have a x charger you really dont need the washers.you already have metal ones ..some will say do it anyway ..
04-18-2010, 07:27 AM #3
And why do you say that the through hull and water box don't match? It doesn't really specify that it does or doesn't, but I figured that both being Riva that they would.
As far as the washers, I'd rather be safe than sorry. I figure if I'm putting this much money into it and 2 washers can take it all down, why not go ahead and replace them.
04-18-2010, 07:36 AM #4
04-18-2010, 08:25 AM #5
04-18-2010, 08:48 AM #6
04-18-2010, 09:06 AM #7
- Join Date
- Oct 2009
I had that set up and you don't need a rrfpr it's perfect with the 50
04-18-2010, 09:37 AM #8
- Join Date
- Aug 2009
- Discovery Bay, CA
speedfreeks air guzzler is cheaper and the performance is AT LEAST the same if not better then the riva
04-18-2010, 11:51 AM #9
04-18-2010, 11:59 AM #10
I'm confused. Your avatar shows an rxpx...is that what you have? it is stock with external IC and 42's. 50's would be pig rich low and mid, i would think. You guys help me out with this pls.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By racingtrx450 in forum Kawasaki PWC Performance (2-stroke)Replies: 7Last Post: 07-19-2007, 04:53 AM
By Mr Bill in forum Yamaha How To & FAQsReplies: 6Last Post: 07-18-2007, 04:23 PM
By rossnemo in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 11-30-2006, 12:59 AM
By RXP04 in forum Sea Doo Open DiscussionReplies: 2Last Post: 07-21-2006, 07:07 AM
By Green Hulk in forum 4-Tec PerformanceReplies: 12Last Post: 04-06-2006, 02:29 AM