04-19-2010, 01:20 PM #1
Riva X-Charger Pro-Series Impeller & Housing on a 07 charger?
hey guys is time for me to get a bigger charger and i been reading aroung that i can machine my 07 back housing of my charger and mount a Mini Rude Upgrade or a Riva X-Charger Pro-Series Impeller & Housing on it,
just want know if some here has done it? and how they like it,
specially now that the riva pro-series is on sale for 499.99..
04-19-2010, 01:27 PM #2
Been there, done that. I did a Stage 3 for a Mini Rude. I sent it to Jerry for a complete rebuilt kit installation. He had it machined and installed the Mini Rude. Great service and turn around time. He also installed the McMaster washers on it. 20 hrs later the S/C is still holding its slip. If you choose to do the X charger he can do that too. IMO I would go for the Mini Rude its a worthwhile investement. I'm seeing 12.9 at 8140-8160 and some are seeing 14 psi with aftermarket ECU's. But installation of the Mini Rude is going to require that you monitor your afrs so your going to have to spend more mula for a rrfpr and injectors and a couple of other things. Not so sure about the fueling requirements for the X Charger pro series, maybe someone will chime in or you can pm Jerry for the info.
04-19-2010, 01:38 PM #3
Re: Riva X-Charger Pro-Series Impeller & Housing on a 07 charger?
may as well send it over to jerry and do the same. at least you know it will be good to go when you get it back.
04-19-2010, 01:42 PM #4
04-19-2010, 03:04 PM #5
I have a friend that has all the tools for rebuilding the supercharger, I just want to see the results that others have gotten, seems to me like this is the road I am going to take.
Plus I want to do all the work myself, is not as difficult as it seems .
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 800AMSOIL4U in forum Sea Doo Open DiscussionReplies: 2Last Post: 01-17-2008, 12:35 PM
By Baden Gray in forum 4-Tec PerformanceReplies: 10Last Post: 09-17-2007, 09:22 PM
By LAB69 in forum 4-Tec PerformanceReplies: 4Last Post: 02-08-2007, 10:46 PM
By LAB69 in forum 4-Tec PerformanceReplies: 11Last Post: 02-08-2007, 07:00 PM
By Chezzy in forum 4-Tec PerformanceReplies: 2Last Post: 12-12-2006, 10:13 PM