Results 1 to 9 of 9
  1. #1

    raider riva spoonsons

    i recently purchased some riva spoonsons for my raider 1100 with no hardware they say ry2600.does anyone know what size bolts and nuts i will need or can i use the existing ones. thanks...tony


  2. #2

  3. #3
    cant find hex head t nut no ware how do i remove the stud the wont seam to budge and now two of them are broke. any had this prob before? if so how do i remove the studs

  4. #4
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    It's not a stud.....it's actually a plate that goes inside and you must remove the foam to get to them. Once you pull the foam away inside ..and loosen all the nuts, whack it a few times with a hammer from the outside "without hitting your hull" and it will pop free and you have to replace the entire insert. I just did this a few months ago on mine.

    M

  5. #5
    O i see. i dident think i could get to them on the raider. guess ill pull them and weld some longer studs on the plate thanks man these things were driving me nuts

  6. #6
    Banned User
    Join Date
    Oct 2006
    Location
    S. FLORIDA
    Posts
    145
    you should'nt need to weld longer screws on it, the ones i just took off today have a allen head bolt on the outside with a female threads on the inside to hold on the sponson.
    if you want i can take some pics tomorrow and show you.. pm me if you want to see them

  7. #7
    mine just had regular nuts on the outside. and i went to every store in town to find the female allenhead ones like you have with no luck.

  8. #8
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    I have an extra strip here beside me for the 95 and the studs are welded to a plate...and has washers on the outside of the hull with the locking nuts.../shrug I can even take a picture...this came from Lee since mine had a broken stud.

  9. #9
    L Carlson's Avatar
    Join Date
    Aug 2007
    Location
    Bonita Springs, Florida, United States
    Posts
    7,118
    +1
    2
    Quote Originally Posted by Mpeavler View Post
    I have an extra strip here beside me for the 95 and the studs are welded to a plate...and has washers on the outside of the hull with the locking nuts.../shrug I can even take a picture...this came from Lee since mine had a broken stud.
    Where is the pic?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. GP1200 Riva QUICK REV CDI on 1100 Raider.
    By akatitan in forum Yamaha Old School Skis
    Replies: 45
    Last Post: 05-26-2016, 11:33 AM
  2. FS 1100 Wave raider Riva cap and 38cc/ 84mm domes 100.00
    By ltd-187 in forum Yamaha Classifieds
    Replies: 2
    Last Post: 05-03-2011, 06:05 AM
  3. FS Yamaha Raider Riva Groovy Ride Plate - $17
    By seatsR4toilets in forum Yamaha Classifieds
    Replies: 3
    Last Post: 04-16-2010, 01:59 PM
  4. raider 1100 riva spoonsons
    By pitbullsoul in forum Yamaha Old School Skis
    Replies: 0
    Last Post: 08-10-2008, 09:00 PM
  5. Help with Jetting on riva set up raider
    By kiwi in forum Yamaha Old School Skis
    Replies: 5
    Last Post: 12-01-2006, 04:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •