04-24-2010, 12:57 AM #1
99 gp 1200 engine parts ( all of it )
I've got a complete engine -
NEED TO SALE ASAP!
There is some fine cracks and scaring in the lower end of the crank case and the top part of the crank case.
One of the rods are bent.
One piston busted / gone - the other 2 look ok
Crank has some seal issues
Cylinder sleeve on # 3 is needing replaced, other 2 look ok. ( other than that it looks ok )
Head appears to be fine -
The minor problems appear to be only in the 2 bottom half of the engine.
No coupler or fly wheel, carbs, intake, reeds, mounts, hoses, etc - just the engine it self.
( I may include the mounting plates, but not the mounts that bolt it in the hull )
SEE PICS BELOW -
I have more pics and or can take better ones if any one is really interested, I want you to know 100% what you'll be getting,
I will ship this at actual cost, no BS charges, actual shipping..... my zip is 40515 - near here, pick up is all good too!
Can ship as early as MONDAY - it's all in a box as we speak!
Make me a fair deal ( for what YOU know it's worth and I'll ship it with in 24 hrs after receiving cleared payment ! )
I prefer to sell it to one person if any ones interested so I dont have to make multiple shipments!
04-27-2010, 01:02 AM #2
04-27-2010, 12:19 PM #3
- Join Date
- Aug 2009
- LI, NY
05-16-2010, 08:12 AM #4
- Join Date
- May 2010
Im keen to grab a cylinder. Have you got any left and how muck
05-16-2010, 10:01 AM #5
I've already sold the engine. No parts left of it. I've got the maount plates if any one needs those. I may have a couple of other things, will check and.post back.
05-16-2010, 10:46 AM #6
Who bought the engine ?
Was the front crank bearing still good ?
05-16-2010, 10:57 AM #7
Some guy outta WV bought it.
I believe all the engine was good except for what I had listed above. I do think the # 3 bearing was bad too.
This guy had another 1200 engine and was going to use mine and his for parts and had a friend who had all the equipment to do the work and some one to weld, etc. He didnt want to have to use SBT - sure glad ( from what I hear now ) I didnt either!
As I mentioned, I've got the mount plates ( for sale ) and whole pump, minus the grate, plate and nozzle I MAY sell - if any one would be interested, lemme know!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ph2ocraft in forum Polaris Open DiscussionReplies: 1Last Post: 03-04-2008, 10:38 AM
By malibu65 in forum Yamaha PWC Performance (2-stroke)Replies: 0Last Post: 02-20-2008, 05:39 PM
By GNLuver in forum Yamaha Old School SkisReplies: 11Last Post: 09-23-2007, 09:00 PM
By jcc011185 in forum Yamaha Open DiscussionReplies: 10Last Post: 07-22-2007, 09:15 AM
By Island racer in forum Kawasaki PWC Performance (2-stroke)Replies: 0Last Post: 01-06-2007, 07:39 PM