Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24
  1. #1

    Interesting first ride!

    Picked up an 04 RXP215 a couple months ago and after countless hours of reading the goods and bads on here as well as spending about $2000 on it I finally got to ride it for the first time. Aside from the new groco leaking at one of the fittings, an injector wire that came unplugged and the connection for the charging system wires that I forgot to plug in the ride went well... after an hour of swearing.

    Installed was an xs ic w/bleed mod, gen 2 wheel, 42lb injectors, 15/20R, exit nozzle w/81mm ring, opas blockoffs, removed nosecone, 08 exhaust, riva intake, catch can, riva washers, riva grate.

    I got 72.1 on the gps, 1000ft, 65f, 7950rpms. Glad to see a reasonable number with not have ridden it before. Any more input on what I could to to get a couple more mph? I used the hose that goes out the exhaust at the back for the bleed mod is that a good place?

    Here are some pics
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P4130032.JPG 
Views:	107 
Size:	1.44 MB 
ID:	185070   Click image for larger version. 

Name:	P4140040.JPG 
Views:	87 
Size:	1.44 MB 
ID:	185071  


  2. #2
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    I would go with a 4 inch air intake, and the freebee mods if they have not been done already..Speed seems a little low for them type of mods..hmmmmm

  3. #3
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Pitch that prop to get your rpm's up to 8100

  4. #4
    GOT BOOST? Dockside's Avatar
    Join Date
    Dec 2008
    Location
    Ontario, Canada
    Posts
    3,879
    +1
    116
    Quote Originally Posted by Snoman View Post
    I would go with a 4 inch air intake, and the freebee mods if they have not been done already..Speed seems a little low for them type of mods..hmmmmm
    +1 on the low speed... 76mph is average for thoughs Mods

  5. #5
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    Quote Originally Posted by bigdaddyRXP View Post
    Pitch that prop to get your rpm's up to 8100
    +1 or put a 83 ring in there.

  6. #6
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    Pick up a guzzler rear air kit and your rpms will possibly be spot on.

    Put a few hours in your ride plate sealing and filling it good and you will proabably be around 75.

    Where did you get the blue hose for the water lines at?? that looks pretty cool.

  7. #7
    Tampa SeaDoo Crew TampaSpeedster's Avatar
    Join Date
    Sep 2009
    Location
    Tampa, FL
    Posts
    95
    Could he possibly be lean with the I/C and 42lb inj? Might need a RRFPR?

  8. #8
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Quote Originally Posted by TampaSpeedster View Post
    Could he possibly be lean with the I/C and 42lb inj? Might need a RRFPR?
    Anything is possible BUT i highly doubt hes lean with that setup..Many have run that combo with no issues on fueling..

  9. #9
    The only free mod that hasnt been done is filling the rideplate holes, and that will come soon. That should help a bit. Also gonna do that mod to the midpipe as well. That blue hose came from the local auto parts store. It is expensive silicone stuff made by goodyear, couldnt pass on the color!

  10. #10
    Focker Foggy's Avatar
    Join Date
    Oct 2007
    Location
    Olathe KS
    Posts
    672
    PUT IN an 83 mm RING..
    You will pick up about 100 rpm and a little speed.
    Plus, your hole shot will improve.

    I wouldn't think that you are lean due to your elevation !!

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RXP First Ride...RPM Question
    By Teddy57 in forum 4-Tec Performance
    Replies: 2
    Last Post: 05-16-2006, 06:13 PM
  2. RXP First Ride....RPM Question
    By Teddy57 in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 05-15-2006, 03:59 PM
  3. first ride today.
    By Krazy-K in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 04-22-2006, 11:51 PM
  4. first ride of the season tested new 14/19 solas prop
    By daverxp4 in forum Sea Doo Open Discussion
    Replies: 12
    Last Post: 04-15-2006, 12:25 PM
  5. Impressions after First Ride today
    By 1 FAST VE in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-27-2005, 03:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •