Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1
    suckondeez's Avatar
    Join Date
    Apr 2010
    Location
    west haven, ct
    Posts
    333

    67-Stepping Motor Stuck Open

    so i convinced my buddy to get a gpr yesterday and he took it out just for a test drive today and after about 10 mins of riding he got the check engine warning. the code is 67-Stepping Motor Stuck Open and ive tried to search but theres not much info on it...even when the warning sounds it still runs perfect


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by suckondeez View Post
    so i convinced my buddy to get a gpr yesterday and he took it out just for a test drive today and after about 10 mins of riding he got the check engine warning. the code is 67-Stepping Motor Stuck Open and ive tried to search but theres not much info on it...even when the warning sounds it still runs perfect
    You will get that code if you let up on throttle and turn steering back and forth a few times quick.

  3. #3
    suckondeez's Avatar
    Join Date
    Apr 2010
    Location
    west haven, ct
    Posts
    333
    Quote Originally Posted by JIM'S PERFORMANCE View Post
    You will get that code if you let up on throttle and turn steering back and forth a few times quick.
    he got and reset the code like 3 or 4 times...so i dont really think it was something like that

  4. #4
    Nick 20rxp04's Avatar
    Join Date
    Dec 2008
    Location
    Mooresville NC
    Posts
    375
    +1
    2
    interesting, very interesting...

  5. #5
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by suckondeez View Post
    he got and reset the code like 3 or 4 times...so i dont really think it was something like that
    Then you will need a stepping motor if he is not doing that. On a efi GPR i can trip code 67 at will. If you need it i have one you can buy.

  6. #6
    suckondeez's Avatar
    Join Date
    Apr 2010
    Location
    west haven, ct
    Posts
    333
    Quote Originally Posted by JIM'S PERFORMANCE View Post
    Then you will need a stepping motor if he is not doing that. On a efi GPR i can trip code 67 at will. If you need it i have one you can buy.
    how much..and how hard is it to change? have to remove the exhaust im pretty sure

  7. #7
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by suckondeez View Post
    how much..and how hard is it to change? have to remove the exhaust im pretty sure
    You have to remove the pipe and it's on top of the throttle body's. $100 plus shipping for a good used one. You can not buy it from the dealer it is sold with the complete throttle body for over 1 grand.

  8. #8
    suckondeez's Avatar
    Join Date
    Apr 2010
    Location
    west haven, ct
    Posts
    333
    will it hurt anything to drive it the way it is now?

  9. #9
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by suckondeez View Post
    will it hurt anything to drive it the way it is now?
    no

  10. #10
    suckondeez's Avatar
    Join Date
    Apr 2010
    Location
    west haven, ct
    Posts
    333
    ok..i told him ya have one for him. he said hes gonna give it a bit to see "if it fixes itself" before he changes it lol

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. error code 66 stepping motor stuck closed
    By DONALDBUCHANAN in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 08-02-2009, 04:12 PM
  2. Code 66 (Stepping motor stuck closed)
    By NickS VR4 in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-12-2008, 08:57 PM
  3. Stepping Motor code54
    By steach in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 09-09-2007, 04:30 PM
  4. motor stuck
    By matt cook in forum Polaris How To & FAQs
    Replies: 1
    Last Post: 08-31-2007, 12:38 AM
  5. Code 67 (stepping motor stuck open)
    By Rusty in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 02-24-2006, 07:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •