09-18-2006, 03:55 PM #1
Fuel Controller Installation Instructions
Thanks goes out to bttek1 for writing this up.
09-18-2006, 11:08 PM #2
for those would would rather have a PDF
09-19-2006, 09:07 AM #3
03-03-2007, 06:08 PM #4
OK I am not very smart I printed off the instructions and the way my fuel controller is these instuctions dont make since
I have 3 wires 2 of them have 2 conections and 1 is different with a cap on the plug.
picture 1 is easy but after that I cant make since of it please help and pictures would be great as I am not very smart this is the only thing keeping me from being ready to test so HELP
03-03-2007, 07:52 PM #5
the one with the cap ignore... that's for Brian to program it...
now you have two pigtails with 2 plugs on each pigtail...
you need to complete the loop... you take a stock plug out, and put a fuel controller plug IN... now the stock plug plugs into the extra plug on the pig tail.
the shorter of the pigtails.. unplug the stock MAP sensor plug, and plug in the fuel controller, and plug the stock plug into the piggy back harness female plug
next... the longer of the pigtails...Cam sensor on the cylinder head... unplug the stock plug and plug the fuel controller in.. then take the old stock plug and plug it into the female plug on the pigtail
it's just re-routing the loop.. the fuel controller plugs go into the ski sensors... the old stock wiring harness plugs go into the pigtail female plugs.
03-04-2007, 03:31 PM #6
OK I think I got it The map sensor is it the first (TOP) plug on the back side of the ECU I know which one is the cam sensor
thanks for helping I could not figure out the extra(programing) plug
03-06-2007, 01:58 PM #7
The MAP sensor is located between the #3 and #2 intake runner.
03-06-2007, 08:51 PM #8
thanks for the help guys I installed it this afternoon I looked in the manuel for the locations my book called one a CAP sensor vs CAM and I was looking in the wrong place for the MAPS sensor sometimes I need pictures now I am ready to hit the water as soon as my new 15/19R gets here maybe Wednesday
04-15-2007, 06:53 PM #9
- Join Date
- Jul 2005
- euxton nr chorley lancashire, england
04-16-2007, 11:36 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Lbaronio in forum 4-Tec PerformanceReplies: 7Last Post: 03-01-2011, 10:14 AM
By dav_dman in forum 4-Tec PerformanceReplies: 4Last Post: 03-05-2010, 11:29 AM
By rx4pain in forum Sea Doo How To & FAQsReplies: 8Last Post: 07-18-2007, 10:45 AM
By Green Hulk in forum 4-Tec PerformanceReplies: 18Last Post: 06-17-2005, 02:21 PM
By Red Devil in forum 4-Tec PerformanceReplies: 11Last Post: 06-13-2005, 01:52 PM