Thread: 05 block oiling system question
05-02-2010, 07:12 PM #1
05 block oiling system question
Does anyone know if you can run an 06+ front oil pump on an 04 block?? OR do you have to run the 04 front pump with the 04 block? I was under the impression that all the blocks for the most part are the same. Any help would be really appreciated.
Last edited by suck my wake; 05-04-2010 at 06:55 AM. Reason: found out its an 04 not an 05 block
05-02-2010, 09:36 PM #2
05-03-2010, 09:37 AM #3
Ok then can anyone tell me why oil would be coming up the fill tube when the motor is running? If I take the oil cap off while the motor is running oil starts coming out and not just a little oil, its very much under pressure I have never had this happen before so this is a new one on me....anybody?
05-04-2010, 05:39 AM #4
OK so I found that the blocks are not completely identical, maybe physically on the outside but the oil passage's are different. I can't believe no one has run into this yet
05-04-2010, 06:18 AM #5
the 06+ style dosen't use the oil pressure jet under the head, and the rocker shaft has different size holes if I'm correct. maybe u need to pull out the pressure jet to run the newer style.
05-04-2010, 06:55 AM #6
05-04-2010, 08:05 AM #7
I believe you have to drill a hole, I have been told before where and how big but cannot remember.
Les will know.
05-04-2010, 08:16 AM #8
The oil gallery is different you just can not use it like plug and paly and is not so sample like other people are stating in this forum.
05-04-2010, 10:00 AM #9
I put the 04 front oil pump on and it works like a charm, imagine that Learn something new everyday!
05-04-2010, 10:57 AM #10
- Join Date
- Jun 2005
- rome ga
Did you have the 06 crankcase breather on with 06 pump?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Kraf-T in forum 2-Stroke PerformanceReplies: 5Last Post: 12-10-2007, 11:19 AM
By c6rvette in forum 4-Tec PerformanceReplies: 4Last Post: 05-28-2007, 12:01 AM
By LT1GMC in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 04-07-2007, 07:01 PM
By mudd in forum Polaris How To & FAQsReplies: 1Last Post: 12-20-2006, 12:34 PM
By great lakes gpr 1200 in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 05-19-2006, 11:39 PM