Results 1 to 5 of 5
  1. #1

    Flushing ride plate - questions with pictures...

    I thought this would be easier than trying to explain my questions...












  2. #2
    http://www.amazon.com/Permatex-81158.../dp/B000AL6WLA

    that is the black silicone I have and I wanted to know if it will work

  3. #3
    bump for help

  4. #4
    Banned User
    Join Date
    Aug 2009
    Location
    Discovery Bay, CA
    Posts
    3,048
    +1
    336
    as far as around the plate, i would scrape as much of the old off as you can, mask it off, then use permatex Right-stuff to fill and smooth the gap. yes all the way, front to back!!
    on the front grate BOLT i used water weld to fill around it. does it help for speed, i dont know, but i did it. also put a line w/ perm. marker to watch and sure it doesnt back off.
    the rear grate BOLTS i used the same method as the front. to seal between the intake grate and ride plate, more masking and right-stuff to fill the gap. i wouldnt do water weld as it may possibly be a mother ______ to get the grate back off
    the 4th picture i cant tell what that is, maybe the way im looking at it. so i dont kwno what to tell ya!
    hope that helps
    mike

  5. #5
    Quote Originally Posted by Mike H View Post
    the 4th picture i cant tell what that is, maybe the way im looking at it. so i dont kwno what to tell ya!
    mike
    Thanks Mike. The fourth picture is the housing for the impeller shaft where it enters the pump tunnel

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. impeller questions.. with pictures
    By jcc011185 in forum Polaris PWC Performance
    Replies: 22
    Last Post: 09-27-2006, 02:59 PM
  2. Ride plate question
    By porksword in forum Yamaha PWC Performance (2-stroke)
    Replies: 38
    Last Post: 08-25-2006, 01:59 PM
  3. ride plate questions
    By Lvnspeed in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-04-2006, 07:16 PM
  4. Hot ride plate question?
    By Alex13 in forum 4-Tec Performance
    Replies: 3
    Last Post: 07-27-2006, 10:07 PM
  5. Hot ride plate question?
    By Alex13 in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 07-27-2006, 10:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •