05-06-2010, 12:54 AM #1
Block offs, Primers, Gaskets gp 1200 npv
I'm trying to find some deals on the following for a friend and me for the GP1200 NPV
I will need :
2 block off kits
3 primer kits
1 set of install gaskets ( everything required to put a new engine in )
If any one has any of these, please let me know!
05-06-2010, 12:57 AM #2
3 primer kits or one for a triple?
05-06-2010, 12:59 AM #3
Well, maybe you can help me out there Bill
Obviously they have 3 carbs, but I really dont know which I will need.... I've been looking for some info, but cant seem to find any solid on which one I need!
OH - I miss read, but maybe you can answer me for sure on my question - ( will a single work on a triple ? )
I have 3 different gp's I need all these parts for.....
05-06-2010, 01:15 AM #4
a set of GP carbs requires a triple primer kit, it has the fittings for the choke removal and tees and fuel line necessary to complete the job. look at the pic where the choke shafts used to be those are the nipples and opposite side gets plugs. you run a line from the fuel return to the primer pump then to each of the three nipples. A triple Mikuni kit has everything you need for one set of carbs.
05-07-2010, 08:08 AM #5
Thanks Bill for the info!
I had read some where a single would work, but I dont think I would like it or that's even right for that matter....thanks for confirming!
Happen to have any instructions for an install for a primer kit ? ( I want to take a look before I buy some )
Read also, so I dont have to take out the choke plates ( or should I ? ) that I can use the old oil injection lines for a primer kit ?
Thanks for the help!
05-07-2010, 08:24 AM #6
on the GP1200 the oil injection lines are in the FA, so if you are keeping stock FA sure why not.
05-07-2010, 02:31 PM #7
Great Bill, thanks -
I plan on it for now atleast ! (since you mention it, will putting on an after market FA ( whatever they call the little air cones ) give me more power / speed, etc ?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By gba in forum 4-Tec PerformanceReplies: 8Last Post: 02-13-2008, 05:04 PM
By wavehummer in forum 4-Tec PerformanceReplies: 1Last Post: 07-09-2007, 09:59 PM
By earthshaker in forum Kawasaki PWC Performance (4-stroke)Replies: 0Last Post: 06-19-2007, 08:16 PM
By Turbo Todd in forum 4-Tec PerformanceReplies: 1Last Post: 09-20-2006, 01:10 PM
By CarFanatic in forum 4-Tec PerformanceReplies: 24Last Post: 06-06-2006, 08:22 AM