Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 37
  1. #1
    Piston? WHAT Piston?!? JGringo's Avatar
    Join Date
    May 2007
    Location
    Brookfield, WI/ Des Moine, Iowa/ Houghton, MI
    Posts
    145

    Part-out: sl650,750,780 parts EVERYTHING

    Polaris Yard SALE!!!
    I have my entire Polaris sl780 jet ski up for parting-out. I lost interest and the willingness to keep this ski going. Everything came off a working engine/ski.
    ALL PRICES DO NOT INCLUDE Pay Pal Fees OR Shipping Fees!!!!!!!!!!!

    Please post what you want, where you are from, and THEN PM me.
    Prices are negotiable.
    Everything is located in Brookfield, WI, just outside of Milwaukee, so if you can pick it up it will save you shipping charges...


    Engine:

    3 sl780 cylinder Jugs w/Sanded smooth exhaust ports
    --> Also, comes with matching Wiseco pistons, needle bearings, and bars
    $100.00 per set (a set = cylinder+ piston + needle bearings, etc)







    3 stock heads shaved by a professional company in Chicago.
    --> Unknown squish area (Can check if needed--Compression was within pump fuel)

    $15.00 each


    780 Crankshaft [checked for trueness (1 hour of run time)]
    $250.00


    Stock 780 Mikuni Triple Carburetors
    $200.00


    Stock 780 Intake Manifold
    $50.00
    Stock Fuel Pump
    $15.00
    Stock 780 Mikuni Carb FA Adaptors
    $5.00 (each)
    3 Tau Ceti Carbon Fiber FA’s (Rec Series)
    $30.00 (each)
    3 Blowsion Outerwears
    $10.00 (each)
    2 Prok FA’s
    $50.00 (for both)


    Stock 780 Exhaust Manifold
    $50.00


    3 Stock reed cages with Boysen Reeds
    $100.00


    Stock 780 Flywheel cover
    $20.00
    Stock 780 Cooling Rail w/ Thermostat
    $30.00
    780 Crankcases with HSP Oil Block off Kit and Good Stator
    $300.00


    Stock Starter
    $60.00
    Stock Bendix
    $30.00
    RAD Lightweight Charging Flywheel
    $125.00




    Stock Flywheel
    $50.00
    DG Tri-Oval Waterbox (Nice and loud)
    $50.00


    Sl650 DRY Exhaust Pipe
    $100.00


    Stock Engine Mounting Plate
    $25.00
    Other:
    Extended Pump (No Nozzle-cracked, no impeller)
    $100.00






    Stock Impeller (Very Clean)
    $50.00




    Extended Driveshaft (mint) [a.k.a. Virage Driveshaft]

    $100.00


    Wet Wolf Pump Cone (No screws included) -- Purple
    $40.00
    UMI Racing Steering System (needs to be oiled-a little sticky)ŕNo Bars included
    $100.00
    KVPI Aluminum Finger Throttle
    $30.00
    Good driveshaft seals [for between engine and pump cavity]
    $45.00
    Blowsion Billet KAWASAKI Fuel Cap--MINT [Sorry-kind of random]
    $40





  2. #2
    thester71's Avatar
    Join Date
    Jun 2009
    Location
    central ma.
    Posts
    1,698
    KVPI Aluminum Finger Throttle, pm sent

  3. #3
    BLRider's Avatar
    Join Date
    Feb 2010
    Location
    SE MI
    Posts
    17
    I'll take these if they are still available.

    I am from Michigan, PM sent


  4. #4
    Piston? WHAT Piston?!? JGringo's Avatar
    Join Date
    May 2007
    Location
    Brookfield, WI/ Des Moine, Iowa/ Houghton, MI
    Posts
    145
    Finger Throttle and Prok Filters pending, I have to check shipping costs...

  5. #5
    Never kick a terd on a Hot day! jorlando32's Avatar
    Join Date
    Jul 2009
    Location
    Durant, Ok
    Posts
    98
    Billet gas cap, Ill take it if you still have it

  6. #6
    rwc297's Avatar
    Join Date
    Dec 2009
    Location
    jacksonville beach florida
    Posts
    49

    Red face heads

    i will take all three heads and one cyl with piston. do you happen to have a stock piston around? before i commit to buy though can you use one of these cyl combos with two other stock cyls? and what gaskets do i need for the heads? sorry for all of the questions but i am kinda new to this sport.....ok ok really new! i can do the wrenching but dont have the supporting knowledge if you know what i mean.
    if you get the chance to sell these for sure then by all means do so, i wouldhate to hold up a sale for you while deciding if it will work
    regards,
    steve
    Last edited by rwc297; 05-07-2010 at 11:17 PM. Reason: left out info

  7. #7
    Piston? WHAT Piston?!? JGringo's Avatar
    Join Date
    May 2007
    Location
    Brookfield, WI/ Des Moine, Iowa/ Houghton, MI
    Posts
    145
    The cylinders are bored .2mm over (71.5mm) with Wiseco pistons. If you want to change out one cylinder and leave the rest with the stock bore, you could have issues with the engine running smoothly (maybe causing more damage and costs later). I might be able to give you a deal on all three cylinders with heads, just shoot me a PM if you are still interested...

    The gaskets you should use between the heads and the cylinders would be the stock metal gaskets that can be found here --> http://www.shopsbt.com/pol-1996-slx780/42-304-02.html

  8. #8
    Piston? WHAT Piston?!? JGringo's Avatar
    Join Date
    May 2007
    Location
    Brookfield, WI/ Des Moine, Iowa/ Houghton, MI
    Posts
    145
    Prok filters still available. They are originally intended for a Seadoo 951 but they are the multi-fits so they should fit anything with the right adapter.

    Wet Wolf Cone, Blowsion Billet Fuel cap, Finger Throttle pending...

    Bump.

  9. #9
    Piston? WHAT Piston?!? JGringo's Avatar
    Join Date
    May 2007
    Location
    Brookfield, WI/ Des Moine, Iowa/ Houghton, MI
    Posts
    145
    Blowsion Fuel Cap -- Sold.

    Wet Wolf Cone -- Sold.

    Everything else is still available...

    BUMP.

  10. #10
    I'D RATHER SWEAT THAN SHIVER hyoctane23's Avatar
    Join Date
    May 2007
    Posts
    1,972
    +1
    34
    I'm interested in the outerwears..

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Parting out sl 750 / 780
    By Yamaha-Fx17 in forum Polaris Classifieds
    Replies: 22
    Last Post: 04-25-2016, 10:37 PM
  2. FS - Parts parting out sl650, sl750, slt 750
    By derekshep in forum Polaris Classifieds
    Replies: 0
    Last Post: 08-28-2013, 11:34 AM
  3. parting out Polaris SL650, 750, 780
    By Rolling20s in forum Polaris Classifieds
    Replies: 42
    Last Post: 05-18-2011, 11:43 AM
  4. Parting out SLT 750
    By 1bad90notchback in forum Polaris Classifieds
    Replies: 5
    Last Post: 10-05-2008, 08:26 AM
  5. ***Parting out 96 SL 780**** Complete
    By brad148405 in forum Polaris Classifieds
    Replies: 0
    Last Post: 09-13-2008, 02:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •