Results 1 to 10 of 10
  1. #1
    ABSOF*CKINLUTELY enjoisht's Avatar
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    148

    Little Help Please!

    Ok i did some searching guys and found nothing... My 04 RXP over the weekend was acting funny... we got done riding i shut it off and then went to go start it up about an hour later to load it had no power whatsoever... So i found that my negative terminal came a little loose... i tightened the terminal and it fired right up... but when i put my key in the word "sensor" flashes 3 times then seadoo pops up... she starts up and runs fine... but this worries me??? I always keep an eye on my RPM'S with this new supercharger and what not... it was very very choppy and nasty and my RPMS were still around 7900... I also noticed every once in a while it will take 2 tries to start the ski.. almost like the battery doesn't have enough juice... Any help here..?? Thanks ahead of time. Kyle


  2. #2
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    Tighten up all your connections and replace your battery bro and ride out!

    When you get a chance pick up a Deltran Battery Tender JR. They have a quick connect you can leave permanently in the ski and when done riding you can just plug it up.

    Good Insurance

  3. #3
    ABSOF*CKINLUTELY enjoisht's Avatar
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    148
    Quote Originally Posted by Ocman View Post
    Tighten up all your connections and replace your battery bro and ride out!

    When you get a chance pick up a Deltran Battery Tender JR. They have a quick connect you can leave permanently in the ski and when done riding you can just plug it up.

    Good Insurance
    sweet so you think it was just my battery coming disconnected? I just hooked it up to the hose and it still says Sensor-sensor-sensor-seadoo.. when key is put on...

  4. #4
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    Quote Originally Posted by enjoisht View Post
    sweet so you think it was just my battery coming disconnected? I just hooked it up to the hose and it still says Sensor-sensor-sensor-seadoo.. when key is put on...
    Yep. You may have some codes that need to be cleared by Buds at the Dealer. If its not a problem just wait till you have to visit them.

  5. #5
    Swedish Viking Craigo's Avatar
    Join Date
    Jun 2008
    Location
    Seattle
    Posts
    1,367
    +1
    62
    Quote Originally Posted by Ocman View Post
    If its not a problem just wait till you have to visit them.
    After you visit them, then you've got problems!

  6. #6
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    See if you have any codes. The system likes to freak-out when the battery gets low or loose ground. My guess is code 1517 compass out or range and your VTS is also not working.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	2005 Sea-Doo Engine Service Manual.jpg 
Views:	225 
Size:	582.2 KB 
ID:	187288  
    Attached Files Attached Files

  7. #7
    ABSOF*CKINLUTELY enjoisht's Avatar
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    148
    Quote Originally Posted by beerdart View Post
    See if you have any codes. The system likes to freak-out when the battery gets low or loose ground. My guess is code 1517 compass out or range and your VTS is also not working.
    great thank you! when i get home from work i will try that and see...

  8. #8
    ABSOF*CKINLUTELY enjoisht's Avatar
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    148
    Quote Originally Posted by Craigo View Post
    After you visit them, then you've got problems!

    lol... Hey if i get hooked up to BUDS wont it do that 2004 update? And then i will need the new knock sensor and wiring harness....????? If so is this a PITA to do?

  9. #9
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77

    Re: Little Help Please!

    Make sure they install the pigtail adapter if its not there already bro

  10. #10
    ABSOF*CKINLUTELY enjoisht's Avatar
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    148
    Ok guys so i ran the code it was a p1517... so i took it to Bill at WMF watercraft in Millsboro,De and he hooked me up and cleared the code.. All is well now !!! Thanks for all the help!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Little help please :-)
    By r33pwrd in forum Open Discussion
    Replies: 2
    Last Post: 11-13-2007, 01:25 PM
  2. Little help please 1992 seadoo sp fuel line routes
    By fst4dr96 in forum 2-Stroke Performance
    Replies: 1
    Last Post: 08-04-2007, 06:41 PM
  3. Need a little help please...
    By lafjax in forum 4-Tec Performance
    Replies: 18
    Last Post: 09-08-2006, 07:00 PM
  4. Little help please
    By CRAZEDRXP in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 06-01-2006, 02:38 PM
  5. Can some one Post! A little Help Please!
    By Angelse68cal in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-04-2005, 07:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •