05-09-2010, 05:28 PM #1
2000 Polaris pro 1200 Random Tube?
i found a tube inside the hull that is not connected to anything on the end inside the hull there is a short tubelike Wire almost filter and it is just laying in there the otherside goes through the hull out the impeller area?
the exit is a open tube inside the impeller area closest to the outside
what is the purpose of this tube? and where should the inside one be plugged into ?
i can submit pics if needed
05-09-2010, 05:35 PM #2
Welcome to the Hulk.
That tube is the auto bilge siphon it works by sucking a vacuum from the pump.
05-09-2010, 05:39 PM #3
but its just lying in there loose should it be conected to the bilgepump?
05-09-2010, 05:44 PM #4
The screen should be zip-tied to the low point of the hull.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By RollBama in forum Polaris Open DiscussionReplies: 4Last Post: 08-25-2007, 02:02 PM
By S12L00X in forum Polaris Open DiscussionReplies: 7Last Post: 07-31-2007, 07:17 AM
By S12L00X in forum Polaris Open DiscussionReplies: 16Last Post: 07-26-2007, 02:21 PM
By S12L00X in forum Polaris PWC PerformanceReplies: 9Last Post: 07-25-2007, 05:16 PM
By SMOKEWAGON in forum Polaris Open DiscussionReplies: 6Last Post: 05-22-2007, 10:08 AM