Results 1 to 6 of 6
  1. #1
    tysonfzr's Avatar
    Join Date
    Nov 2009
    Location
    johor bahru malaysia
    Posts
    621

    Can I use a 08 sho ecu on my 09 ecu?

    I juz send my ecu for reflash at the time being can I use my 08 sho ecu on my 09 fzr?


  2. #2
    There is a difference in the ecu's. the SHO ecu is programed with the cruise assist and no wake features and the harness is wired to suit. The SHO one in theory would work as the wiring harness on the FZ does not include the wires to the handle bar switch found on the SHO so there for the pins on the ecu should not trigger these modes as it would if the switches were active on the sho.

  3. #3
    hitman's Avatar
    Join Date
    Aug 2006
    Location
    Ft. Lauderdale, FL
    Posts
    4,328
    +1
    12
    The mapping is also slightly different, but you can give it a try. Let us know how it goes. I'm curious. I think it will be fine but have never tried it yet.

  4. #4

    Join Date
    Aug 2008
    Location
    Southern Florida
    Posts
    5,589
    +1
    345
    We've tried it. You are going to get error codes.

  5. #5
    tysonfzr's Avatar
    Join Date
    Nov 2009
    Location
    johor bahru malaysia
    Posts
    621
    Quote Originally Posted by SHOdude View Post
    We've tried it. You are going to get error codes.
    wat does it means error codes?

  6. #6

    Join Date
    Aug 2008
    Location
    Southern Florida
    Posts
    5,589
    +1
    345
    Quote Originally Posted by tysonfzr View Post
    wat does it means error codes?
    The warning beepers will go off, and a number is displayed...similarily if you were to start running out of gas and the lights starting going off. We just push the button that turns the buzzer off. We didn't have any reason to believe that it hurt the motor as it ran fine.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 3
    Last Post: 07-17-2013, 04:09 PM
  2. Can I use this aluminum manifold intake on my 2012 rxpx?
    By budman5201 in forum 4-Tec Performance
    Replies: 7
    Last Post: 05-16-2012, 04:23 AM
  3. FS '08 sho ecu
    By SHOBiz in forum Yamaha Classifieds
    Replies: 5
    Last Post: 05-10-2010, 05:48 PM
  4. Can You Use Other Types Of Couplers On A Gp1300r
    By JEFF in forum Yamaha How To & FAQs
    Replies: 1
    Last Post: 02-10-2007, 12:16 AM
  5. Can you use the blue hose connectors on the Power pipe also?
    By Therock in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-06-2005, 02:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •