Results 1 to 3 of 3
  1. #1

    2001 genesis bad noise from pump

    I just picked up this 2001 1200 di for a really good deal wasent running. I got it going in a few hrs runs grate, I took it out to ride it and after about 15min I noticed it started making a pretty bad noise from the rear of the ski and got worise as I road so I parked it. I was wanting to know is there a common problem with the pump or mid shaft bearing before I take it apart, and is there any special tools needed?
    Sorry im new to polaris skis.

  2. #2
    Click avatar for tech links/info K447's Avatar
    Join Date
    Jul 2007
    near Toronto, Canada

    You will need to remove the jet pump, and check the bearings. Info on how to do this is posted elsewhere.

    Tip: You need to remove four long bolts, not the four nuts at the base of the pump.

    I expect the pump stator bearings have failed, and will need replacing.

    Also check the impeller and surrounding wear ring for damage.

    Maximum specification for blade clearance to the wear ring is .020 inches, and .010 or closer is preferred.

    I just bought a Polaris PWC - what should I do?

  3. #3
    Yep pulled pump stator off and the inside bearing was in all busted up and the other was good and crunchy. Im putting it back together now. Thanks for all the help, yes it was a very ez job after you get the stator bolts out.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. noise from pump area and vibration
    By kawaka in forum Kawasaki How To & FAQs
    Replies: 12
    Last Post: 10-18-2015, 04:43 PM
  2. Noise coming from pump when running on hose...
    By FrankieV123 in forum 4-Tec Performance
    Replies: 8
    Last Post: 07-25-2009, 05:11 PM
  3. HELP...250x noise from pump area
    By ksalles in forum Kawasaki PWC Performance (4-stroke)
    Replies: 40
    Last Post: 07-12-2009, 10:27 PM
  4. Noise from pump Question ?
    By elviswongg in forum Kawasaki Open Discussion
    Replies: 2
    Last Post: 06-30-2009, 05:34 PM
  5. Noise from pump??
    By Snoman in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 05-16-2006, 02:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts