Thread: Fully assembled Stator
05-18-2010, 11:43 AM #1
Fully assembled Stator
From a 2000 SLX Will this work with a 2000 pro 1200? and will i be able to use http://www.watercraftsuperstore.net/.../607SO053.html
05-18-2010, 11:49 AM #2
should work just fine,think you'll like the prop better than the stocker,have you removed the fitting on the pto solid coupler and replaced with a grease zerk fitting so you can keep it lubed?
05-18-2010, 11:54 AM #3
To be honest i have no idea what you just said lol....
where is the PTO solid coupler located?
05-18-2010, 12:01 PM #4
the pto cylinder is the cylinder closest to the pump (pto=power take off)the coupler is a piece of metal that the end of the driveshaft slides into.it needs to be greased every 25 hours,the fitting thats on it makes that difficult,replace that fitting with a standard grease zerk and voila...maintanence made easy.
05-18-2010, 12:04 PM #5
Any ideas where i can get this from?
05-18-2010, 01:58 PM #6
05-18-2010, 04:38 PM #7
Do you guys happen to have pics of this? so i can fully Grasp what you are saying lol I am a total NOOB to this.
05-18-2010, 05:52 PM #8
I see you're in Raleigh, I'm in Cary. Where do you ride?
05-18-2010, 07:18 PM #9
05-18-2010, 07:54 PM #10
I normally take them out to falls lake Tony
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By thompsdw in forum 2-Stroke PerformanceReplies: 3Last Post: 04-07-2008, 09:28 PM
By ph2ocraft in forum Polaris Open DiscussionReplies: 15Last Post: 03-03-2008, 01:28 AM
By bcbill in forum Polaris Open DiscussionReplies: 4Last Post: 05-26-2007, 12:04 PM
By xlint89 in forum Polaris Open DiscussionReplies: 9Last Post: 04-13-2007, 08:29 PM
By Totallyblown in forum Sea Doo Open DiscussionReplies: 14Last Post: 03-26-2006, 11:54 AM